Other Name: Caliper Assembly, Front Brake (Service); Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
Position: Front Driver Side
Replaces: 18029818
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2000-2005 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
Other Name: Caliper Assembly, Front Brake (Service); Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
Position: Front Passenger Side
Replaces: 18029819
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2000-2005 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2000-2005 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2000-2007 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2000-2007 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2000-2005 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1995-1999 Chevrolet Monte Carlo | LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
Chevrolet Monte Carlo Brake Calipers
Our website offers an extensive catalog of genuine Chevrolet Monte Carlo Brake Calipers at unbeatable prices. Every OEM Chevrolet Monte Carlo Brake Calipers comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Monte Carlo Brake Calipers Parts Questions & Experts Answers
Q: How to Service and Repair Brake Calipers on Chevrolet Monte Carlo?
A: Start brake caliper service and repair by emptying all brake fluid and working carefully while compressing air to remove the Pistons. Set the brake caliper in place using the engine support fixture (J41358-B) for stable holding. Push wood through the caliper while protecting it with a towel and send non-lubricated filtered air to eject the pistons. When one Piston does not exit position the removed Piston first then put a wood block between the Piston and the caliper before tightening the c-clamp and applying air pressure again. Using tools made for the task remove pistons and Piston seals from the brake caliper while also removing the bleeder valve cap and valve from the housing. Use denatured alcohol to clean all parts then clean with filtered compressed air. Replace the pistons or brake caliper when you find material loss, chemical reactions, eating away, or physical damage to the Piston parts. Apply filtered lubricated compressed air to clean the brake caliper assembly and then apply denatured alcohol to wipe it dry. Place one Piston bore at a time into clean dot-3 brake fluid right before you put in the dust and Piston seals while keeping the Piston vertically aligned. Install the Piston dust seal using the universal driver handle (J8092) and boot seal installer (J45863) along with installing and tightening the bleeder valve to 19 nm (14 ft. Lbs.). Close the process by replacing the bleeder valve cap.