Make sure this part fits

GM 18046197
Caliper, Front Passenger Side

1997-2005 GM

Customer Questions & Expert Answers (37)
GM 18046197 Caliper, Front Passenger Side
GM 18046197 Caliper, Front Passenger Side
  • Part Description
    Caliper Assembly, Front Brake (Service); Brake Caliper
  • Position
    Front Passenger Side
  • Replaces
    18029819
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number18046197
    Part DescriptionCaliper Assembly, Front Brake (Service); Brake Caliper
    Other NamesCaliper, Wheel Brake Cylinder/Caliper
    Item Dimensions7.8 x 9.0 x 6.6 inches
    Item Weight10.40 Pounds
    PositionFront Passenger Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces18029819
    ManufacturerGeneral Motors
    SKU18046197
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2000-2005 Buick LeSabreCustom, Limited6 Cyl 3.8 L GAS
    1997-2005 Buick Park AvenueBase, Ultra6 Cyl 3.8 L GAS
    1997-1999 Buick RivieraBase6 Cyl 3.8 L GAS
    1997-2005 Cadillac DeVilleBase, Concours, d'Elegance, DHS, DTS, Protection Series8 Cyl 4.6 L GAS
    1997-2002 Cadillac EldoradoBase, ESC, ETC8 Cyl 4.6 L GAS
    2003-2004, 1997 Cadillac SevilleSLS, STS8 Cyl 4.6 L GAS
    2000-2005 Chevrolet ImpalaBase, LS, LS Sport, SS6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
    2000-2005 Chevrolet Monte CarloLS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
    2001-2003, 1997-1999 Oldsmobile AuroraBase6 Cyl 3.5 L GAS, 8 Cyl 4.0 L GAS
    1998 Oldsmobile IntrigueBase, GL, GLS6 Cyl 3.8 L GAS
    View More
  • Customer Questions & Expert Answers

    Q:
    Is this 18046197 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 18046197 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after inspecting the fluid level for the 2001 Buick Park Avenue? Posted by Customer
    A:
    Raise and support the vehicle, then remove the wheel and tire assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How do you attach the new brake caliper for the 2001 Buick LeSabre? Posted by Customer
    A:
    Attach it to the upper caliper pin bolt, rotate it down into the bracket, and install the brake caliper pin bolts, tightening them to 27 Nm (20 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How do you compress the caliper piston for the 2000 Buick LeSabre? Posted by Customer
    A:
    Use a large C-clamp placed over the caliper housing against the back of the outboard pad, tightening it slowly until the piston is pushed in enough to slide the caliper off the rotor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How should the park brake actuator shaft seal be removed for the 2004 Buick LeSabre? Posted by Customer
    A:
    Carefully tap the service tab to remove and discard it, inspecting the sealing surface for damage.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done after removing the C-clamp for the 2002 Buick Park Avenue? Posted by Customer
    A:
    Plug the openings in the brake caliper and brake hose to prevent fluid loss.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How do you remove the brake caliper piston from the caliper bore for the 2005 Buick LeSabre? Posted by Customer
    A:
    Direct low-pressure compressed air into the caliper bore through the fluid inlet hole.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done if the rust or corrosion cannot be removed or if there are cracks for the 2001 Buick Park Avenue? Posted by Customer
    A:
    Replace the caliper assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How do you install the brake caliper for the 2002 Buick LeSabre? Posted by Customer
    A:
    Install it over the brake pads into the brake caliper bracket and secure with the caliper pin bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How do you disconnect the park brake cable for the 2002 Buick LeSabre? Posted by Customer
    A:
    Pull down on the front park brake cable and disconnect it from the park brake cable connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What cleaning agents can be used for the brake caliper components for the 2003 Buick Park Avenue? Posted by Customer
    A:
    Clean the brake caliper piston bore and seal counterbore, as well as the caliper piston, with denatured alcohol or an equivalent.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How should the brake caliper bracket be cleaned for the 2004 Buick Park Avenue? Posted by Customer
    A:
    Clean any rust and debris from the brake caliper bracket using a wire brush.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done after inspecting the fluid level for the 2005 Buick Park Avenue? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the next step after plugging the openings for the 2001 Buick LeSabre? Posted by Customer
    A:
    Remove the brake caliper pin bolts and take off the brake caliper.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the torque specification for the brake caliper pin bolts for the 2002 Cadillac DeVille? Posted by Customer
    A:
    Tighten them to 113 Nm (83 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the first step to overhaul the front brake caliper (J55) for the 2000 Cadillac DeVille? Posted by Customer
    A:
    Gather the necessary tools, including the Boot Installer (J 26267).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the final step after bleeding the brake system for the 2002 Cadillac DeVille? Posted by Customer
    A:
    Reinstall the tire and wheel assembly and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How do you secure the brake caliper after installation for the 2002 Cadillac Eldorado? Posted by Customer
    A:
    Rotate the brake caliper down into the bracket and install the brake caliper pin bolts, tightening them to 27 Nm (20 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the first step to replace the rear brake caliper for the 2001 Cadillac Eldorado? Posted by Customer
    A:
    Inspect the fluid level in the brake master cylinder reservoir; if it is above the midway point between the maximum-full and minimum allowable levels, remove fluid to that midway point.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the next step after plugging the openings for the 2001 Cadillac DeVille? Posted by Customer
    A:
    Remove the brake caliper pin bolts and take off the brake caliper.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should you do if the caliper requires repair for the 2000 Cadillac Eldorado? Posted by Customer
    A:
    Detach the bolt attaching the inlet fitting to the caliper and plug the opening to prevent fluid loss and contamination.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done after inspecting the fluid level for the 2001 Cadillac Eldorado? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the first step to replace the rear brake caliper (J55) for the 2004 Cadillac DeVille? Posted by Customer
    A:
    Inspect the fluid level in the brake master cylinder reservoir.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done with the brake caliper bleeder valve and cap after inspection for the 2005 Cadillac DeVille? Posted by Customer
    A:
    Install the brake caliper bleeder valve and cap.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What precautions should be taken regarding torque values and work environment for the 2003 Cadillac DeVille? Posted by Customer
    A:
    Ensure that torque values specified are for dry, non-lubricated fasteners and perform all service operations on a clean bench, free from mineral oil materials.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the final step after bleeding the brake system for the 2003 Cadillac Seville? Posted by Customer
    A:
    Remove the 2 wheel lug nuts retaining the rotor to the hub, install the tire and wheel assembly, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done after reconnecting the park brake cable for the 2004 Cadillac Seville? Posted by Customer
    A:
    Reconnect the front park brake cable to the park brake cable connector, bleed the brake system, and gradually apply the brake pedal to approximately 2/3 of its travel, slowly releasing it and repeating until a firm pedal is achieved.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What type of lubricant should be applied to the brake caliper pin bolts for the 2004 Cadillac Seville? Posted by Customer
    A:
    Apply high temperature silicone brake lubricant to the first design hardware or NIGLUBE grease to the second design hardware, avoiding lubricant on the brake pad hardware.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done after supporting the brake caliper for the 2002 Chevrolet Impala? Posted by Customer
    A:
    Remove the caliper from the mounting bracket without disconnecting the hydraulic brake flexible hose, then take out the rear brake pads.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What action should be taken if there are cracks or excessive damage for the 2004 Chevrolet Impala? Posted by Customer
    A:
    Replace the caliper assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done to prevent brake fluid loss and contamination for the 2000 Chevrolet Impala? Posted by Customer
    A:
    Remove the hose bolt attaching the inlet fitting and plug the openings in the caliper housing and the pipe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done during installation for the 2001 Chevrolet Impala? Posted by Customer
    A:
    Lubricate the bolt boots and bushings with silicone grease, install the caliper bracket using the bracket bolts, and tighten them to 115 Nm (85 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How should the brake caliper and its components be cleaned for the 2004 Chevrolet Monte Carlo? Posted by Customer
    A:
    Clean the brake caliper, piston bore, seal counterbore, and caliper piston with denatured alcohol or an equivalent, then dry these components with non-lubricated, filtered air.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be noted about the caliper pin bolts for the 2003 Chevrolet Monte Carlo? Posted by Customer
    A:
    The leading caliper pin bolt has a bushing while the trailing pin bolt is solid.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How should the interior of the caliper housing be prepared during piston removal for the 2000 Chevrolet Monte Carlo? Posted by Customer
    A:
    Use clean cloths to pad the interior of the caliper housing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done after inserting the caliper piston into the bore for the 2001 Chevrolet Monte Carlo? Posted by Customer
    A:
    Place the new piston dust boot seal over the piston.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What tool is used to push the caliper piston into the caliper bore for the 2002 Chevrolet Monte Carlo? Posted by Customer
    A:
    A large C-clamp.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 18046197, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 18046197 Caliper, Front Passenger Side. It is sometimes referred to as GM Brake Caliper Repair Kit, GM Brake Calipers. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 18046197 Caliper, Front Passenger Side. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery