How to replace the front wheel bearing on 2000 Chevrolet Monte Carlo?

Before you start the front wheel drive shaft bearing replacement you need to elevate and hold the vehicle. First take off the tire and wheel after that disconnect the speed sensor connector from its bracket and extract it. Unbolt and take off both the Brake Caliper Bracket and brake caliper along with the brake rotor. Set the spindle remover tool (J 28733-B) on the Wheel Hub with three wheel nuts. Remove the drive shaft wheel nut before placing the spindle remover over the Wheel Bearing. Push the wheel drive shaft out of the Wheel Bearing/hub with the spindle remover (J 28733-B), then take off and discard all Wheel Bearing/hub bolts to prevent damage to the wheel drive shaft outer seal (boot). Put on the new Wheel Bearing/hub unit while using brand new fasteners and tightening everything to 130 nm (96 ft. Lbs.). First put back the wheel drive shaft nut ahead of sealing the brake rotor with Brake Caliper Bracket installed to its proper seat with brake caliper attached. Fit the wheel speed sensor electrical connector to its designated bracket and attach the end of the connector. Place the tire and wheel unit before lowering the vehicle.

OEM 2000 Chevrolet Monte Carlo Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wheel Bearings found

View related parts
2000 Chevrolet Monte Carlo Front Hub & Bearing Part Number: 88964096
$134.06 MSRP: $250.16
You Save: $116.10 (47%)
ADD TO CART
Product Specifications
- Other Name: Hub Assembly, Front Wheel; Wheel Bearing & Hub Repair Kit; Axle Bearing.; Hub & Bearing; Hub; Hub, Front Wheel
- Position: Front
- Replaces: 89047803, 12413005, 12413097
- Item Weight: 8.50 Pounds
- Item Dimensions: 7.0 x 7.0 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 88964096
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2000 Chevrolet Monte Carlo Hub Assembly, Front Part Number: 12429204
$223.57 MSRP: $433.94
You Save: $210.37 (49%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Hub Kit, Front Wheel; Wheel Bearing & Hub Assembly; Disc Brake Hardware Kit; Wheel Hub Repair Kit; Axle Bearing.; Front Hub & Bearing; Front Hub; Hub & Bearing; Hub Kit, Rear Wheel
- Position: Front
- Replaced by: 19433930
- Item Weight: 12.00 Pounds
- Item Dimensions: 7.0 x 7.0 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 12429204
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Monte Carlo Submodels:
- LS, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Chevrolet Monte Carlo Hub & Bearing, Rear Part Number: 12413091
$96.99 MSRP: $175.54
You Save: $78.55 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub, Rear Wheel; Wheel Bearing and Hub Assembly; Wheel Bearing & Hub Assembly; Wheel Bearing; Axle Bearing; Wheel Hub
- Position: Rear
- Replaces: 07470611, 7470611
- Item Weight: 8.10 Pounds
- Item Dimensions: 9.5 x 8.2 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 12413091
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

2000 Chevrolet Monte Carlo Wheel Bearing

With a comprehensive array of OEM 2000 Chevrolet Monte Carlo Wheel Bearing, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Monte Carlo Wheel Bearing are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Monte Carlo Wheel Bearing Parts and Q&A

Q: How to replace the front wheel bearing on 2000 Chevrolet Monte Carlo?
A: Before you start the front wheel drive shaft bearing replacement you need to elevate and hold the vehicle. First take off the tire and wheel after that disconnect the speed sensor connector from its bracket and extract it. Unbolt and take off both the Brake Caliper Bracket and brake caliper along with the brake rotor. Set the spindle remover tool (J 28733-B) on the Wheel Hub with three wheel nuts. Remove the drive shaft wheel nut before placing the spindle remover over the Wheel Bearing. Push the wheel drive shaft out of the Wheel Bearing/hub with the spindle remover (J 28733-B), then take off and discard all Wheel Bearing/hub bolts to prevent damage to the wheel drive shaft outer seal (boot). Put on the new Wheel Bearing/hub unit while using brand new fasteners and tightening everything to 130 nm (96 ft. Lbs.). First put back the wheel drive shaft nut ahead of sealing the brake rotor with Brake Caliper Bracket installed to its proper seat with brake caliper attached. Fit the wheel speed sensor electrical connector to its designated bracket and attach the end of the connector. Place the tire and wheel unit before lowering the vehicle.