OEM 2001 Cadillac DeVille Brake Booster

Brake Power Booster
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Boosters found

  • 2001 Cadillac DeVille Brake Booster - 18026033
    2001 Cadillac DeVille Brake Booster Diagram - 18026033
    View related parts
    Product Specifications
    • Other Name: Booster, Hydraulic Power Brake Booster; Power Booster
    • Item Weight: 14.10 Pounds
    • Item Dimensions: 11.4 x 16.2 x 11.9 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 18026033
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2001 Cadillac DeVille Submodels:
    • Base, Concours, d'Elegance, DHS, DTS | 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
  • 2001 Cadillac DeVille Brake Booster - 88967235
    2001 Cadillac DeVille Brake Booster Diagram - 88967235
    View related parts
    Product Specifications
    • Other Name: Booster, Hydraulic Power Brake Booster; Power Booster; Booster Assembly
    • Replaces: 18043672, 18029879
    • Item Weight: 13.70 Pounds
    • Item Dimensions: 10.3 x 16.3 x 10.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 88967235
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2001 Cadillac DeVille Submodels:
    • Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS

2001 Cadillac DeVille Brake Booster

With a comprehensive array of OEM 2001 Cadillac DeVille Brake Booster, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Cadillac DeVille Brake Booster are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Cadillac DeVille Parts Questions & Experts Answers

  • Q: How to replace the hydraulic brake booster on 2001 Cadillac DeVille?
    A: Start by disconnecting the negative Battery Cable when replacing the hydraulic Brake Booster. The vehicle needs to position on a flat terrain having blocked front wheels and engaged parking brake. Perform hose separations of power steering inlet, power steering pressure, and power steering gear to booster. You should separate the booster assembly by removing its master cylinder along with wiring harness bracket and spacer. The installer should remove the left closeout insulator panel along with the left knee bolster and left knee bolster bracket. The vacuum Brake Booster retainer clip and foam spacer must be taken off from the Brake Pedal clevis pin until the vacuum Brake Booster push rod can be removed from the clevis pin. The installation requires removal of both vacuum Brake Booster mounting nuts and vacuum Brake Booster assembly as well as the replacement gasket if the booster needs replacement. If the vacuum Brake Booster mounting gasket was removed it should be attached to the booster before installing the vacuum Brake Booster assembly. Secure the Brake Pedal assembly with 36 nm (27 ft. Lbs.) torque to the booster stud mounting nuts while applying gm p/n12346293 specified lubricant to the clevis pin of the Brake Pedal then connect the vacuum Brake Booster pushrod to it. Place the foam spacer along with the retaining clip onto the clevis pin after which install the left knee bolster bracket followed by left knee bolster and left closeout insulator panel. The master cylinder needs to be installed onto the booster assembly after reattaching both the booster spacer and wiring harness bracket. The power steering pressure hose and power steering gear to booster hose and power steering inlet hose connection must be completed before replacing the negative Battery Cable and bleeding the hydraulic booster system while removing front wheel blocks then releasing the parking brake.

Related 2001 Cadillac DeVille Parts