OEM 2001 Cadillac Seville Throttle Position Sensor

2001 Cadillac Seville Parts Questions & Experts Answers

• Q: How to replace the Throttle Position Sensor on 2001 Cadillac Seville?

  A: The first step to replace a Throttle Position Sensor involves breaking the idle air control electrical connector from the iac sensor then removing the MAP Sensor electrical connector from the MAP Sensor. Replace the water pump belt cover after removing the tp sensor retaining screws along with disconnecting the tp sensor electrical connector and disconnecting the tp sensor electrical connector from the tp sensor . Community members should mount an o-ring onto the tp sensor before connecting the tp sensor electrical connector to the tp sensor . The tp sensor should be fitted to the Throttle Body while tightening its screws to a torque of 2.3 n.m (20 lb in). The iac electrical connector needs to be reconnected to the iac sensor while the MAP Sensor electrical connector needs connecting to the MAP Sensor. The procedure requires using the ignition to put the system in run/on mode for one minute then placing it into lock/off position for fifteen seconds.