How to replace the front brake line on 2002 Chevrolet Camaro?

You must lift and support the vehicle before disconnecting the front tire and wheel parts for front brake hose replacement. Clear up all dirt and foreign material from both the front brake pipe and front brake hose fitting bolt. You should remove the front brake pipe from the brake hose by using a back up wrench on the hose fitting while keeping the brake hose bracket and pipe free of damage. Detach the brake hose retaining clip from the hose fitting at the part and disassemble the brake hose from its bracket. Take off all components comprising brake hose fitting bolt, brake hose clip, gaskets, and caliper from the front brake system. Discard the gaskets. Apply brake fluid on the threads of the brake hose fitting bolt before putting it onto the front caliper with the brake hose bracket gaskets and clip. Thread the bolt and tighten it to 55 nm (41 ft. Lbs.) when the caliper ledge aligns with the hose fitting flange. Put the brake hose in place on the bracket and fasten the brake hose retainer onto the bracket at its correct position. Hand tighten the brake hose fitting stage with a back up wrench before using a spanner to fasten the front brake pipe tube nut to 15 nm torque. Check the hose in its proper placement when the vehicle turns left and right. Drain the brake fluid system after testing. Reinstall the front tire and wheel before returning the vehicle to normal position.

OEM 2002 Chevrolet Camaro Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Brake Lines found

View related parts
2002 Chevrolet Camaro Flex Hose, Front Driver Side
Part Number: 22163505
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Item Weight: 0.80 Pounds
- Item Dimensions: 15.9 x 3.6 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22163505
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Camaro Submodels:
- Base, Z28, Z28 SS | 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
2002 Chevrolet Camaro Flex Hose, Front Passenger Side
Part Number: 22163506
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Item Weight: 0.80 Pounds
- Item Dimensions: 3.1 x 2.2 x 15.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22163506
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Camaro Submodels:
- Base, Z28, Z28 SS | 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
2002 Chevrolet Camaro Flex Hose
Part Number: 22163484
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.5 x 2.8 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 22163484
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Camaro Submodels:
- Base, Z28, Z28 SS | 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
2002 Chevrolet Camaro Flex Hose
Part Number: 22163405
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear
- Replaces: 17999663
- Item Weight: 0.80 Pounds
- Item Dimensions: 7.1 x 3.2 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22163405
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Camaro Submodels:
- Base, Indianapolis 500 Pace Car, RS, Z28, Z28 SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
2002 Chevrolet Camaro Flex Hose
Part Number: 22163404
Product Specifications
- Other Name: Hose; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Item Weight: 0.60 Pounds
- Item Dimensions: 7.1 x 6.2 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22163404
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Camaro Submodels:
- Base, RS, Z28, Z28 SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS

2002 Chevrolet Camaro Brake Line

With a comprehensive array of OEM 2002 Chevrolet Camaro Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Camaro Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Camaro Parts Questions & Experts Answers

Q: How to replace the front brake line on 2002 Chevrolet Camaro?
A: You must lift and support the vehicle before disconnecting the front tire and wheel parts for front brake hose replacement. Clear up all dirt and foreign material from both the front brake pipe and front brake hose fitting bolt. You should remove the front brake pipe from the brake hose by using a back up wrench on the hose fitting while keeping the brake hose bracket and pipe free of damage. Detach the brake hose retaining clip from the hose fitting at the part and disassemble the brake hose from its bracket. Take off all components comprising brake hose fitting bolt, brake hose clip, gaskets, and caliper from the front brake system. Discard the gaskets. Apply brake fluid on the threads of the brake hose fitting bolt before putting it onto the front caliper with the brake hose bracket gaskets and clip. Thread the bolt and tighten it to 55 nm (41 ft. Lbs.) when the caliper ledge aligns with the hose fitting flange. Put the brake hose in place on the bracket and fasten the brake hose retainer onto the bracket at its correct position. Hand tighten the brake hose fitting stage with a back up wrench before using a spanner to fasten the front brake pipe tube nut to 15 nm torque. Check the hose in its proper placement when the vehicle turns left and right. Drain the brake fluid system after testing. Reinstall the front tire and wheel before returning the vehicle to normal position.