How to properly replace and install brake lines on Chevrolet Camaro?

Replace brake pipes with double-walled steel types to avoid system failures and retain the new pipes properly by installing fasteners in their original placement. When segmenting brake pipes you must use matching original diameter double-walled steel pipes along with proper size fittings that create identical flare configurations. First assess the brake pipe area to fix and remove its retainers before choosing a spot for sectioning that offers enough space for the CH-45405 Brake Pipe Flaring Kit. Cut the brake pipe to replacement length along with flaring distances equal to 6.35mm (0.250 in) for 4.76mm (3/16 in) pipe, 9.50mm (0.374 in) for 6.35mm (1/4 in) pipe, and 12.67mm (0.499 in) for 7.94mm (5/16 in) pipe. Use the pipe cutter from CH-45405 - Brake Pipe Flaring Kit to cut the brake pipe into the precise measured length before selecting a set of brake pipe and tube nuts. Use the coating stripping tool from the kit to remove nylon coating from brake pipe ends but avoid damaging the metal surface. Use the de-burring tool to round both ends of the pipe before placing tube nuts on and removing all residue from the brake line and tool components. Tighten only the screw and choose the needed die set before inserting the die halves into the cage base. Push the modified pipe mouthpiece through the dies backside until it reaches its final position and take away the addition die. Action the lever to push the forming mandrel until it touches the clamping dies and then tighten their contact screw. Pull back the hydraulic forming ram then put in the finishing cone and complete the process by letting the cone bottom against the dies. To check the flare's specifications inspect the pipe with the dies pulled out: the diameter should measure between 6.74-7.10 mm (3/16') or 8.57-9.27 mm (1/4') or 10.42-10.79 mm (5/16'). Adjust the new pipe with a brake pipe bending equipment while keeping it 19 mm (3/4 in) away from all moving components during installation. Join the brake pipe to its place using the right connections then reattach it to its holders. Afterwards bleed the brake fluid system and search for leakages in the brake pipe connections under running engine power when brakes are engaged.

OEM Chevrolet Camaro Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

35 Brake Lines found

View related parts
Chevrolet Camaro Flex Hose, Front Driver Side
Part Number: 19173581
$20.28 MSRP: $36.23
You Save: $15.95 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Replaces: 18032329
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1992 Chevrolet Camaro | Base, Iroc-Z, RS, RS Heritage Edition, Z28, Z28 Heritage Edition | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Flex Hose, Rear Passenger Side
Part Number: 19173580
$21.50 MSRP: $38.40
You Save: $16.90 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Passenger Side
- Replaces: 10113076, 18032328
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1992 Chevrolet Camaro | Base, Iroc-Z, RS, RS Heritage Edition, Z28, Z28 Heritage Edition | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Flex Hose, Front Passenger Side
Part Number: 84237975
$18.03 MSRP: $32.23
You Save: $14.20 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front Passenger Side
- Replaced by: 86538445
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Flex Hose, Front Passenger Side
Part Number: 84237977
$15.67 MSRP: $29.41
You Save: $13.74 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front Passenger Side
- Replaced by: 86538447
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Flex Hose, Driver Side
Part Number: 86538452
$13.92 MSRP: $24.88
You Save: $10.96 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Hydraulic Brake; Brake Hose
- Position: Driver Side
- Replaces: 23352259, 84238004, 84173165
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Flex Hose, Passenger Side
Part Number: 86538451
$13.92 MSRP: $24.88
You Save: $10.96 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Hydraulic Brake; Brake Hose
- Position: Passenger Side
- Replaces: 23352260, 84238003, 84173166
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Flex Hose
Part Number: 84238002
$14.18 MSRP: $26.46
You Save: $12.28 (47%)
ADD TO CART
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear
- Replaced by: 86538450
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Flex Hose, Front Passenger Side
Part Number: 19173307
$14.21 MSRP: $25.38
You Save: $11.17 (45%)
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Replaces: 17980324, 18032051
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1992 Chevrolet Camaro | Base, Berlinetta, Iroc-Z, LT, RS, RS Heritage Edition, Sport, Z28, Z28 Heritage Edition | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Flex Hose, Rear
Part Number: 23425472
Product Specifications
- Other Name: Hose, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear
- Replaces: 92229716
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2015 Chevrolet Camaro | SS, Z/28, ZL1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Camaro Flex Hose
Part Number: 92229712
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2015 Chevrolet Camaro | SS | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Flex Hose
Part Number: 92229713
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2015 Chevrolet Camaro | SS | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Flex Hose
Part Number: 22163404
Product Specifications
- Other Name: Hose; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2002 Chevrolet Camaro | Base, RS, Z28, Z28 SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Flex Hose, Passenger Side
Part Number: 18017654
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1997 Chevrolet Camaro | Base, Indianapolis 500 Pace Car, RS, Z28 | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Flex Hose, Front Passenger Side
Part Number: 17999666
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1997 Chevrolet Camaro | Base, Indianapolis 500 Pace Car, RS, Z28 | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Flex Hose, Driver Side
Part Number: 18017655
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1997 Chevrolet Camaro | Base, Indianapolis 500 Pace Car, RS, Z28 | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Flex Hose
Part Number: 22163405
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear
- Replaces: 17999663
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-2002 Chevrolet Camaro | Base, Indianapolis 500 Pace Car, RS, Z28, Z28 SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Flex Hose, Front Driver Side
Part Number: 17999665
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1997 Chevrolet Camaro | Base, Indianapolis 500 Pace Car, RS, Z28 | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Flex Hose
Part Number: 22163484
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2002 Chevrolet Camaro | Base, Z28, Z28 SS | 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Flex Hose, Front Passenger Side
Part Number: 20944522
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2015 Chevrolet Camaro | ZL1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Flex Hose, Front Driver Side
Part Number: 23441689
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Replaces: 92229715
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2015 Chevrolet Camaro | LS, LT | 6 Cyl 3.6 L GAS

| Page 1 of 2 |Next >

1-20 of 35 Results

Chevrolet Camaro Brake Line

Our website offers an extensive catalog of genuine Chevrolet Camaro Brake Line at unbeatable prices. Every OEM Chevrolet Camaro Brake Line comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Camaro Brake Line Parts Questions & Experts Answers

Flex Hose
23441690
Q: How to properly replace and install brake lines on Chevrolet Camaro?
A: Replace brake pipes with double-walled steel types to avoid system failures and retain the new pipes properly by installing fasteners in their original placement. When segmenting brake pipes you must use matching original diameter double-walled steel pipes along with proper size fittings that create identical flare configurations. First assess the brake pipe area to fix and remove its retainers before choosing a spot for sectioning that offers enough space for the CH-45405 Brake Pipe Flaring Kit. Cut the brake pipe to replacement length along with flaring distances equal to 6.35mm (0.250 in) for 4.76mm (3/16 in) pipe, 9.50mm (0.374 in) for 6.35mm (1/4 in) pipe, and 12.67mm (0.499 in) for 7.94mm (5/16 in) pipe. Use the pipe cutter from CH-45405 - Brake Pipe Flaring Kit to cut the brake pipe into the precise measured length before selecting a set of brake pipe and tube nuts. Use the coating stripping tool from the kit to remove nylon coating from brake pipe ends but avoid damaging the metal surface. Use the de-burring tool to round both ends of the pipe before placing tube nuts on and removing all residue from the brake line and tool components. Tighten only the screw and choose the needed die set before inserting the die halves into the cage base. Push the modified pipe mouthpiece through the dies backside until it reaches its final position and take away the addition die. Action the lever to push the forming mandrel until it touches the clamping dies and then tighten their contact screw. Pull back the hydraulic forming ram then put in the finishing cone and complete the process by letting the cone bottom against the dies. To check the flare's specifications inspect the pipe with the dies pulled out: the diameter should measure between 6.74-7.10 mm (3/16') or 8.57-9.27 mm (1/4') or 10.42-10.79 mm (5/16'). Adjust the new pipe with a brake pipe bending equipment while keeping it 19 mm (3/4 in) away from all moving components during installation. Join the brake pipe to its place using the right connections then reattach it to its holders. Afterwards bleed the brake fluid system and search for leakages in the brake pipe connections under running engine power when brakes are engaged.