How to replace the front parking brake cable on Chevrolet Camaro?

A proper replacement of the front Parking Brake Cable demands first positioning the park brake hand lever down to disengage the adjuster pawl followed by vehicle elevation and support. Pull the strand of front cable until extension reaches completion before removing the rear cables from the equalizer . Detach the fitting point of the park brake front cable through usage of the Parking Brake Cable release tool (J 37043) from its bracket before extracting the cable grommet from the underbody cavity. First drop the vehicle to the ground and then empty the front floor console from its position. The park brake lever should be kept in the up position when you detach the park brake spring. Hold the park brake lever down during the process while rotating the adjuster arm forward until it stops moving. After this point bend the tab on the front cable end barrel shape to permit cable strand advancement. To separate the park brake front cable from the park brake lever and Floor Pan use the j 37043 Parking Brake Cable release tool alongside the barrel-shaped front cable end fitting removal from the adjuster track on the pulley. To properly install the park brake front cable combination with grommet you should position them into the Floor Pan slot then use soapy water for lubrication as you carefully position the grommet with the help of a small curved flat-ended pry bar. Succeed in connecting the front park brake cable to the park brake lever by placing the barrel-shaped front cable end fitting into the adjuster track on the pulley then rotate the adjuster arm toward the rear to activate the adjuster spring. Place the park brake lever down before raising the vehicle to support and then attach the rear fitting of the front cable conduit to the Floor Pan bracket while pulling the equalizer backwards until it stops and connecting the rear cables to it. To finish installation you should lower the vehicle and take three complete cycles on the park brake lever before placing the front floor console.

OEM Chevrolet Camaro Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Parking Brake Cables found

View related parts
Chevrolet Camaro Rear Cable
Part Number: 22740875
$62.87 MSRP: $112.27
You Save: $49.40 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear
- Replaces: 92235127
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2015 Chevrolet Camaro | LS, LT, SS, Z/28, ZL1 | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Camaro Intermediate Cable
Part Number: 84346027
$26.89 MSRP: $50.49
You Save: $23.60 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Parking Brake Intermediate; Brake Cable; Cable, Parking Brake
- Replaces: 23412748, 84081764
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2022 Chevrolet Camaro | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Rear Cable
Part Number: 84011078
$10.37 MSRP: $19.48
You Save: $9.11 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear
- Replaces: 92277511
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2022 Chevrolet Camaro | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Rear Cable
Part Number: 10403414
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear
- Replaces: 10255381
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1997 Chevrolet Camaro | Base, Indianapolis 500 Pace Car, RS, Z28 | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Cable
Part Number: 10200444
Product Specifications
- Other Name: Brake Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1989 Chevrolet Camaro | Base, Berlinetta, Iroc-Z, LT, RS, Sport, Z28 | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Cable
Part Number: 12506875
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1992 Chevrolet Camaro | Iroc-Z, RS, RS Heritage Edition, Z28, Z28 Heritage Edition | 6 Cyl 3.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Rear Cable
Part Number: 10424968
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2002 Chevrolet Camaro | Base, Z28, Z28 SS | 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Front Cable
Part Number: 10288166
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2001 Chevrolet Camaro | Base, Z28, Z28 SS | 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Front Cable
Part Number: 10258235
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1997 Chevrolet Camaro | Base, Indianapolis 500 Pace Car, RS, Z28 | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Rear Cable
Part Number: 10255382
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1997 Chevrolet Camaro | Base, Indianapolis 500 Pace Car, RS, Z28 | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Cable
Part Number: 10200446
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1989 Chevrolet Camaro | Base, Berlinetta, Iroc-Z, LT, RS, Sport, Z28 | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Cable
Part Number: 10200443
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1989 Chevrolet Camaro | Base, Berlinetta, Iroc-Z, LT, RS, Sport, Z28 | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Cable
Part Number: 10164125
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1992 Chevrolet Camaro | Iroc-Z, RS, RS Heritage Edition, Z28, Z28 Heritage Edition | 6 Cyl 3.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Cable
Part Number: 10136876
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1992 Chevrolet Camaro | Base, Berlinetta, Iroc-Z, LT, RS, RS Heritage Edition, Sport, Z28, Z28 Heritage Edition | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Cable
Part Number: 10136875
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1992 Chevrolet Camaro | Base, Berlinetta, Iroc-Z, LT, RS, RS Heritage Edition, Sport, Z28, Z28 Heritage Edition | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS

Chevrolet Camaro Parking Brake Cable

Our website offers an extensive catalog of genuine Chevrolet Camaro Parking Brake Cable at unbeatable prices. Every OEM Chevrolet Camaro Parking Brake Cable comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Camaro Parking Brake Cable Parts Questions & Experts Answers

Rear Cable
10424968
Q: How to replace the front parking brake cable on Chevrolet Camaro?
A: A proper replacement of the front Parking Brake Cable demands first positioning the park brake hand lever down to disengage the adjuster pawl followed by vehicle elevation and support. Pull the strand of front cable until extension reaches completion before removing the rear cables from the equalizer . Detach the fitting point of the park brake front cable through usage of the Parking Brake Cable release tool (J 37043) from its bracket before extracting the cable grommet from the underbody cavity. First drop the vehicle to the ground and then empty the front floor console from its position. The park brake lever should be kept in the up position when you detach the park brake spring. Hold the park brake lever down during the process while rotating the adjuster arm forward until it stops moving. After this point bend the tab on the front cable end barrel shape to permit cable strand advancement. To separate the park brake front cable from the park brake lever and Floor Pan use the j 37043 Parking Brake Cable release tool alongside the barrel-shaped front cable end fitting removal from the adjuster track on the pulley. To properly install the park brake front cable combination with grommet you should position them into the Floor Pan slot then use soapy water for lubrication as you carefully position the grommet with the help of a small curved flat-ended pry bar. Succeed in connecting the front park brake cable to the park brake lever by placing the barrel-shaped front cable end fitting into the adjuster track on the pulley then rotate the adjuster arm toward the rear to activate the adjuster spring. Place the park brake lever down before raising the vehicle to support and then attach the rear fitting of the front cable conduit to the Floor Pan bracket while pulling the equalizer backwards until it stops and connecting the rear cables to it. To finish installation you should lower the vehicle and take three complete cycles on the park brake lever before placing the front floor console.