How to replace the rear brake line on 2002 Chevrolet Malibu?

Firstly, lift and support the vehicle appropriately to replace the rear brake hose. Clean all dirt and foreign materials from brake hoses as well as the fittings. Remove the rear brake pipe from the brake hose , remove the retainer clips from the brake hose and remove the brake hose from the bracket . Then show removal of rear brake hose retaining bolt from rear brake hose and brake hose out of vehicle. During installation, how to do it is to connect the brake hose to the vehicle making sure that you align with the fastener notice in terms of torque. Mount the rear brake hose retaining bolt to rear brake hose and tighten to 50 Nm (37 ft. lbs.). Then attach the brake hose to the bracket and attach the retainer clip to the brake hose . Bolt the rear brake pipe to its position on the brake hose and tighten the joining to 27 Nm (20 ft. lbs.). Lastly, drain off the brake hydraulic system and lower the vehicle.

OEM 2002 Chevrolet Malibu Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Lines found

View related parts
2002 Chevrolet Malibu Flex Hose, Rear Driver Side Part Number: 22164521
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Driver Side
- Replaces: 22163469
- Item Weight: 0.70 Pounds
- Item Dimensions: 16.3 x 4.1 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22164521
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Malibu Submodels:
- Base, LS | 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
View related parts
2002 Chevrolet Malibu Flex Hose, Rear Passenger Side Part Number: 22164520
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Passenger Side
- Replaces: 22163470
- Item Weight: 0.60 Pounds
- Item Dimensions: 15.9 x 4.0 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22164520
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Malibu Submodels:
- Base, LS | 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
View related parts
2002 Chevrolet Malibu Flex Hose, Front Part Number: 19366738
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front
- Replaces: 22163193, 22708929, 17999710
- Item Weight: 0.80 Pounds
- Item Dimensions: 13.6 x 1.5 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19366738
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Malibu Submodels:
- Base, LS | 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS

2002 Chevrolet Malibu Brake Line

With a comprehensive array of OEM 2002 Chevrolet Malibu Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Malibu Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Malibu Brake Line Parts and Q&A

Q: How to replace the rear brake line on 2002 Chevrolet Malibu?
A: Firstly, lift and support the vehicle appropriately to replace the rear brake hose. Clean all dirt and foreign materials from brake hoses as well as the fittings. Remove the rear brake pipe from the brake hose , remove the retainer clips from the brake hose and remove the brake hose from the bracket . Then show removal of rear brake hose retaining bolt from rear brake hose and brake hose out of vehicle. During installation, how to do it is to connect the brake hose to the vehicle making sure that you align with the fastener notice in terms of torque. Mount the rear brake hose retaining bolt to rear brake hose and tighten to 50 Nm (37 ft. lbs.). Then attach the brake hose to the bracket and attach the retainer clip to the brake hose . Bolt the rear brake pipe to its position on the brake hose and tighten the joining to 27 Nm (20 ft. lbs.). Lastly, drain off the brake hydraulic system and lower the vehicle.