Make sure this part fits

GM 22164521
Flex Hose, Rear Driver Side

1997-2005 GM

Customer Questions & Expert Answers (9)
GM 22164521 Flex Hose, Rear Driver Side
  • Part Description
    Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line
  • Position
    Rear Driver Side
  • Replaces
    22163469
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2005 Chevrolet ClassicBase, LS4 Cyl 2.2 L GAS
    1997-2003 Chevrolet MalibuBase, LS4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
    2003-2004 Oldsmobile AleroGL, GLS, GX4 Cyl 2.2 L GAS, 6 Cyl 3.4 L GAS
    1997-1999 Oldsmobile CutlassBase, GL, GLS6 Cyl 3.1 L GAS
    1997 Oldsmobile Cutlass Supreme6 Cyl 3.1 L GAS
    1999-2005 Pontiac Grand AmGT, GT1, SE, SE1, SE24 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 22164521 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 22164521 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should you do if there is contact with the hose for the 2004 Chevrolet Classic? Posted by Customer
    A:
    If there is contact, remove the hose and correct the condition before lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step in the installation process for the 2005 Chevrolet Classic? Posted by Customer
    A:
    Assemble the 2 copper brake hose gaskets and the rear brake hose banjo bolt to the brake hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the next step after securing the bracket for the 2004 Chevrolet Classic? Posted by Customer
    A:
    Attach the brake hose to the bracket and secure it with the retainer clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done to the brake hoses and brake pipe fittings before disconnecting for the 2001 Chevrolet Malibu? Posted by Customer
    A:
    Clean any dirt from the brake hoses and brake pipe fittings, and install a rubber cap or plug on the exposed brake pipe fitting end to prevent fluid loss and contamination.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How should the J 29803-A ISO Flaring Kit be set up for the 2002 Chevrolet Malibu? Posted by Customer
    A:
    Clamp the tool body in a vise.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the final step after replacing the brake hose for the 2002 Chevrolet Malibu? Posted by Customer
    A:
    Bleed the hydraulic brake system and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What type of brake pipe should be used when installing a new one for the 2000 Chevrolet Malibu? Posted by Customer
    A:
    Use double-walled steel brake pipe to prevent brake system failure.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step to replace the rear brake hose for the 2003 Chevrolet Malibu? Posted by Customer
    A:
    Raise and support the vehicle, then remove the rear wheel and tire assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Flex Hose, Rear Driver Side 22164521 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 22164521 Flex Hose, Rear Driver Side is available in the market under the name GM Brake Line, Hydraulic Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 22164521 Flex Hose, Rear Driver Side fits certain Chevrolet Malibu, Classic models, as well as Pontiac Grand Am. Additionally, it is compatible with Oldsmobile Cutlass, Alero, Cutlass Supreme models.
The original GM component designated by manufacturer part number 22164521 maintains top performance when functioning as the Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line unit at its Rear Driver Side. The component 22164521 is constructed from durable material and its dimensions span 16.3 x 4.1 x 2.0 inches while weighing 0.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hose, Hydraulic Brake. The part 22164521 has available replacement options 22163469. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.