ChevyParts
My Garage
My Account
Cart
OEM 2001 Chevrolet Malibu Brake Line
Brake Hose- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Brake Lines found
Product Specifications- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Driver Side
- Replaces: 22163469
- Item Weight: 0.70 Pounds
- Item Dimensions: 16.3 x 4.1 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22164521
- Warranty: This genuine part is guaranteed by GM's factory warranty.
- Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Passenger Side
- Replaces: 22163470
- Item Weight: 0.60 Pounds
- Item Dimensions: 15.9 x 4.0 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22164520
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front
- Replaces: 22163193, 22708929, 17999710
- Item Weight: 0.80 Pounds
- Item Dimensions: 13.6 x 1.5 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19366738
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2001 Chevrolet Malibu Brake Line
With a comprehensive array of OEM 2001 Chevrolet Malibu Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Malibu Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2001 Chevrolet Malibu Parts Questions & Experts Answers
- Q: How to replace the front brake line on 2001 Chevrolet Malibu?A: Begin the job by raising and supporting the vehicle before you take off the front wheel and tire unit. Wash brake hose surfaces then secure an expanded rubber plug over the exposed brake pipe end to block leaks and dirt contamination. Detach the front brake pipe fitting from the brake hose and seal the ended fitting with a cap. Pull off the brake hose retaining clip from its mounting bracket and take out hose from its position. Separate the bolts and remove the brake hose while discarding stuck copper brake hose gaskets. First put on the copper brake hose gaskets and front brake bolt onto the brake hose. Then place the front brake hose-to-caliper bolt onto the caliper and the front brake hose banjo bolt onto the front brake caliper before tightening both components to 50 nm (37 ft. Lbs.). Insert the brake hose into the mounting bracket and put on the retaining clip after taking off the rubber cap from the end of the brake pipe. Fasten the front brake pipe to the front brake hose by tightening it to 20 ft. Lbs. (27 Nm). Keep the hose away from suspension areas during intense turns since contact needs adjusting. Complete the brake system service by emptying hydraulic fluid from the system then putting the vehicle into its normal position.
Related 2001 Chevrolet Malibu Parts
2001 Chevrolet Malibu Wheel Bearing
2001 Chevrolet Malibu Brake Backing Plate
2001 Chevrolet Malibu Brake Caliper Repair Kit
2001 Chevrolet Malibu Brake Calipers
2001 Chevrolet Malibu Brake Disc
2001 Chevrolet Malibu Brake Drum
2001 Chevrolet Malibu Brake Dust Shields
2001 Chevrolet Malibu Brake Pad
2001 Chevrolet Malibu Hydraulic Hose
2001 Chevrolet Malibu Parking Brake Cable
2001 Chevrolet Malibu Parking Brake Shoe
2001 Chevrolet Malibu Wheel Cylinder