How to replace the rear disc brake backing plate on 2003 Chevrolet SSR?

The procedure begins by lifting the vehicle and removing both tire and wheel assemblies before proceeding. Start by detaching the park brake cable from the rear brake caliper before you remove the brake caliper assembly along with its bracket and finally remove the rear brake rotor and park brake shoe. Start by removing the rear drive axle with its retaining nuts from the backing plate and pulling out the backing plate from the rear axle housing. The process of installation requires you to place the axle housing flange backing plate and secure all backing plate nuts before tightening the backing plate bolts to 135 nm (100 ft. Lbs.). You should first reinstall the brake rotor along with the park brake shoe followed by the rear drive axle and complete the installation with the brake caliper and bracket assembly. Reconnect the park brake cable to the rear brake caliper and perform an adjustment on the park brake shoe. After finishing with the installation tasks you should put the tire back together with the wheel before lowering the automobile.

OEM 2003 Chevrolet SSR Brake Backing Plate

Brake Dust Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Backing Plates found

View related parts
2003 Chevrolet SSR Splash Shield, Rear Passenger Side
Part Number: 15158973
$35.42 MSRP: $107.60
You Save: $72.18 (68%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Shield, Rear Brake; Brake Dust Shield; Shield; Shield, Brake Flange Plate
- Position: Rear Passenger Side
- Item Weight: 1.60 Pounds
- Item Dimensions: 16.6 x 16.3 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15158973
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet SSR Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2003 Chevrolet SSR Splash Shield, Rear Driver Side
Part Number: 15158972
$38.56 MSRP: $69.80
You Save: $31.24 (45%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Shield, Rear Brake; Shield; Shield, Brake Flange Plate
- Position: Rear Driver Side
- Item Weight: 1.60 Pounds
- Item Dimensions: 15.8 x 15.0 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15158972
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet SSR Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2003 Chevrolet SSR Backing Plate, Front Passenger Side
Part Number: 15753012
$78.45 MSRP: $146.36
You Save: $67.91 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Front Brake; Brake Dust Shield; Splash Shield; Dust Shield; Shield, Brake Flange Plate
- Position: Front Passenger Side
- Item Weight: 1.30 Pounds
- Item Dimensions: 15.3 x 11.6 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15753012
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet SSR Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2003 Chevrolet SSR Backing Plate, Driver Side
Part Number: 88935749
Product Specifications
- Other Name: Plate, Brake Flange/Backing
- Position: Driver Side
- Item Weight: 5.50 Pounds
- Item Dimensions: 9.5 x 9.5 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88935749
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet SSR Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2003 Chevrolet SSR Backing Plate, Passenger Side
Part Number: 88935750
Product Specifications
- Other Name: Plate, Brake Flange/Backing
- Position: Passenger Side
- Item Weight: 5.10 Pounds
- Item Dimensions: 9.2 x 9.3 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88935750
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet SSR Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2003 Chevrolet SSR Splash Shield, Front Driver Side
Part Number: 15753011
$20.13 MSRP: $35.93
You Save: $15.80 (44%)
Product Specifications
- Other Name: Shield-Front Brake; Dust Shield; Shield, Brake Flange Plate
- Position: Front Driver Side
- Item Weight: 1.30 Pounds
- Item Dimensions: 15.8 x 13.5 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15753011
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet SSR Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

2003 Chevrolet SSR Brake Backing Plate

With a comprehensive array of OEM 2003 Chevrolet SSR Brake Backing Plate, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Chevrolet SSR Brake Backing Plate are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Chevrolet SSR Brake Backing Plate Parts Questions & Experts Answers

Q: How to replace the rear disc brake backing plate on 2003 Chevrolet SSR?
A: The procedure begins by lifting the vehicle and removing both tire and wheel assemblies before proceeding. Start by detaching the park brake cable from the rear brake caliper before you remove the brake caliper assembly along with its bracket and finally remove the rear brake rotor and park brake shoe. Start by removing the rear drive axle with its retaining nuts from the backing plate and pulling out the backing plate from the rear axle housing. The process of installation requires you to place the axle housing flange backing plate and secure all backing plate nuts before tightening the backing plate bolts to 135 nm (100 ft. Lbs.). You should first reinstall the brake rotor along with the park brake shoe followed by the rear drive axle and complete the installation with the brake caliper and bracket assembly. Reconnect the park brake cable to the rear brake caliper and perform an adjustment on the park brake shoe. After finishing with the installation tasks you should put the tire back together with the wheel before lowering the automobile.