Make sure this part fits

GM 15753012
Backing Plate, Front Passenger Side

2002-2009 GM

Customer Questions & Expert Answers (10)
GM 15753012 Backing Plate, Front Passenger Side
  • Part Description
    Shield-Front Brake; Brake Dust Shield
  • Position
    Front Passenger Side
  • Manufacturer
    General Motors
Make sure this part fits
$74.11 MSRP: $146.36
You Save: $72.25 (50%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number15753012
    Part DescriptionShield-Front Brake; Brake Dust Shield
    Other NamesSplash Shield; Dust Shield; Shield, Brake Flange Plate
    Item Dimensions15.3 x 11.6 x 1.0 inches
    Item Weight1.30 Pounds
    PositionFront Passenger Side
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU15753012
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RainierCXL, CXL Plus8 Cyl 5.3 L GAS
    2003-2006 Chevrolet SSRBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2006-2009 Chevrolet TrailblazerBase, LS, LT, SS8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Trailblazer EXTLS, LT, North Face6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2005-2009 GMC EnvoyDenali8 Cyl 5.3 L GAS
    2002-2006 GMC Envoy XLDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2004-2005 GMC Envoy XUVSLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 15753012 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15753012 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be reinstalled after securing the backing plate for the 2005 Buick Rainier? Posted by Customer
    A:
    Reinstall the rear drive axle, park brake shoe, rear brake rotor, and brake caliper and bracket assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What precaution should be observed during this process for the 2005 Buick Rainier? Posted by Customer
    A:
    Always observe brake dust precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Dust Shields
    Q:
    What is the first step to replace the front disc brake splash shield for the 2003 Chevrolet SSR? Posted by Customer
    A:
    First, raise the vehicle and remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Dust Shields
    Q:
    What is the next step after removing the front hub and bearing assembly for the 2006 Chevrolet SSR? Posted by Customer
    A:
    Remove the retaining bolts for the splash shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Dust Shields
    Q:
    What should be done after attaching the backing plate for the 2006 Chevrolet SSR? Posted by Customer
    A:
    Install the backing plate nuts and tighten the backing plate bolts to 135 Nm (100 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What components need to be reinstalled after the backing plate for the 2004 Chevrolet SSR? Posted by Customer
    A:
    Reinstall the rear drive axle, park brake shoe, and rear brake rotor, followed by the brake caliper and bracket assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What should be done after removing the tire and wheel assembly for the 2003 Chevrolet SSR? Posted by Customer
    A:
    Detach the park brake cable from the rear brake caliper.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What should be done after removing the tire and wheel assembly for the 2005 Chevrolet SSR? Posted by Customer
    A:
    Take out the front hub and bearing assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Dust Shields
    Q:
    What comes after installing the splash shield for the 2006 GMC Envoy? Posted by Customer
    A:
    Reinstall the front hub and bearing assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Dust Shields
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 15753012, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 15753012 Backing Plate, Front Passenger Side. It is sometimes referred to as GM Brake Backing Plate, GM Brake Dust Shields. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 15753012 Backing Plate, Front Passenger Side. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery