Make sure this part fits

GM 88935750
Backing Plate, Passenger Side

2002-2007 GM

Customer Questions & Expert Answers (13)
GM 88935750 Backing Plate, Passenger Side
  • Part Description
    Plate, Brake Flange/Backing
  • Position
    Passenger Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2003-2006 Chevrolet SSRBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 Chevrolet TrailblazerLS, LT, LTZ, North Face, SS6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Trailblazer EXTLS, LT, North Face6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2006 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2006 GMC Envoy XLDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2004-2005 GMC Envoy XUVSLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 88935750 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 88935750 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the front disc brake splash shield for the 2005 Buick Rainier? Posted by Customer
    A:
    Raise the vehicle and remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Dust Shields
    Q:
    What is the next step after detaching the park brake cable for the 2005 Buick Rainier? Posted by Customer
    A:
    Remove the brake caliper and bracket assembly, followed by the rear brake rotor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What should be done after reinstalling the brake components for the 2006 Chevrolet SSR? Posted by Customer
    A:
    Reconnect the park brake cable to the rear brake caliper and adjust the park brake shoe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What is the first step to replace the front disc brake splash shield for the 2006 Chevrolet SSR? Posted by Customer
    A:
    First, raise the vehicle and remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Dust Shields
    Q:
    What should be done after removing the tire and wheel assembly for the 2004 Chevrolet SSR? Posted by Customer
    A:
    Disconnect the park brake cable from the rear brake caliper, ensuring to handle both the left and right cables appropriately.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What comes after removing the front hub and bearing assembly for the 2003 Chevrolet SSR? Posted by Customer
    A:
    Remove the retaining bolts for the splash shield, and then remove the splash shield itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Dust Shields
    Q:
    What components need to be reinstalled after the backing plate for the 2003 Chevrolet SSR? Posted by Customer
    A:
    Reinstall the rear drive axle, park brake shoe, and rear brake rotor, followed by the brake caliper and bracket assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What is the first step to replace the rear disc brake backing plate for the 2003 Chevrolet Trailblazer? Posted by Customer
    A:
    Raise the vehicle and remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    How do you install the new splash shield for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Begin by placing the new splash shield in position and securing it with the retaining bolts, ensuring they are tightened similarly to the wheel hub and bearing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Dust Shields
    Q:
    What is the first step to replace the front disc brake splash shield for the 2005 Chevrolet SSR? Posted by Customer
    A:
    First, raise the vehicle and remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Dust Shields
    Q:
    What is the next step after removing the wheel cylinder and rear axle shaft for the 2004 GMC Envoy? Posted by Customer
    A:
    Remove the backing plate mounting bolts to take off the backing plate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    How do you remove the splash shield for the 2006 GMC Envoy? Posted by Customer
    A:
    After removing the retaining bolts, take out the splash shield itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Dust Shields
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Backing Plate, Passenger Side 88935750 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 88935750 Backing Plate, Passenger Side is available in the market under the name GM Brake Backing Plate, Brake Dust Shields. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 88935750 Backing Plate, Passenger Side fits certain Chevrolet SSR, Trailblazer, Trailblazer EXT models, as well as GMC Envoy, Envoy XL, Envoy XUV. Additionally, it is compatible with Buick Rainier and Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 88935750 maintains top performance when functioning as the Plate, Brake Flange/Backing unit at its Passenger Side. The component 88935750 is constructed from durable material and its dimensions span 9.2 x 9.3 x 4.0 inches while weighing 5.10 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 88935750 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.