ChevyParts
My Garage
My Account
Cart
OEM 2003 Chevrolet Tracker Brake Line
Brake Hose- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Brake Lines found
2003 Chevrolet Tracker Flex Hose, Passenger Side
Part Number: 30021010Product Specifications- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Item Weight: 0.90 Pounds
- Item Dimensions: 11.7 x 9.7 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 30021010
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2003 Chevrolet Tracker Flex Hose, Driver Side
Part Number: 30021011Product Specifications- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Item Weight: 0.60 Pounds
- Item Dimensions: 32.0 x 3.6 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 30021011
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2003 Chevrolet Tracker Flex Hose
Part Number: 30021013Product Specifications- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear
- Item Weight: 0.50 Pounds
- Item Dimensions: 10.6 x 4.4 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 30021013
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2003 Chevrolet Tracker Brake Line
With a comprehensive array of OEM 2003 Chevrolet Tracker Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Chevrolet Tracker Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2003 Chevrolet Tracker Brake Line Parts Questions & Experts Answers
- Q: How to replace the brake line using the J 29803-A ISO Flaring Kit on 2003 Chevrolet Tracker?A: Use the J 29803-A kit to install double-walled steel brake pipe and avoid brake system failures when replacing the brake line. Start your project by purchasing necessary tubing and steel fitting nuts then limit the tubing length to 3 mm (1/8 inch) more than the old pipe measurement with a string. Fit the nuts to tubing before flaring process and use a de-burring tool to smooth both tube faces. Clean lubricant from all brake pipe and flaring tool elements. Place the J 29803-A ISO Flaring Kit (J 29803-A) in a vise and pick the appropriate forming mandrel size from the set before inserting the mandrel into the tool body. Hold the mandrel in place before threading the forcing screw toward it and backing the screw one full turn. Place the clamping nut onto the brake pipe to enter the collet tube and leave a 19 mm (3/4 inch) length sticking out. Install the collet over the brake pipe and tighten it until the forming tool press fits the pipe face in place. Turn the forcing screw until it reaches its stop point then stop to prevent creating a too large flare tip. When done you can remove the clamping parts to prepare the fitted brake pipe for operation. To match the old pipe shape you need to shape the part with a 19 mm (3/4 inch) gap between it and any moving components.
Related 2003 Chevrolet Tracker Parts
2003 Chevrolet Tracker Brake Proportioning Valve
2003 Chevrolet Tracker ABS Sensor
2003 Chevrolet Tracker Brake Backing Plate
2003 Chevrolet Tracker Brake Caliper Bolt
2003 Chevrolet Tracker Brake Caliper Piston
2003 Chevrolet Tracker Brake Caliper Repair Kit
2003 Chevrolet Tracker Brake Calipers
2003 Chevrolet Tracker Brake Disc
2003 Chevrolet Tracker Brake Drum
2003 Chevrolet Tracker Brake Master Cylinder
2003 Chevrolet Tracker Brake Pad
2003 Chevrolet Tracker Wheel Cylinder