Other Name: Belt Kit, Am7 - Rear Folding Seat; Center Belt Assembly; Belt Kit,Z79 - Typhoon
Position: Rear
Item Weight: 0.70 Pounds
Item Dimensions: 6.1 x 3.2 x 3.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 88934986
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2003 GMC Sonoma Submodels:
SL, SLE, SLS | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
2003 GMC Sonoma Seat Belt
With a comprehensive array of OEM 2003 GMC Sonoma Seat Belt, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 GMC Sonoma Seat Belt are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2003 GMC Sonoma Seat Belt Parts Questions & Experts Answers
Q: How to replace the front seat belt on 2003 GMC Sonoma?
A: Beginning the front seat belt replacement requires removing the bolt that holds the lower seat belt anchor plate to the vehicle. A flat-bladed tool enables the opening of the upper seat belt anchor plate cover while a bolt must be removed from the upper plate to complete the disassembly. Move the seat belt by opening an entry on the body side trim cover before removing the body side trim panel. The seat belt retractor assembly can be removed from the vehicle after removing its bolt which holds it in place. Secure the seat belt retractor assembly to the vehicle by using a bolt which should be tightened to 70 N.m (52 lb ft). Insert the seat belt by guiding it through the opening present in the body side trim cover. Afterward, replace the body side trim panel. Squeeze the seat belt opening trim cover tightly before adding the upper seat belt anchor plate along with its bolt which needs a torque of 70 N.m (52 lb ft). Perform the following sequence: Cover the upper seat belt anchor plate, fasten the lower plate with its bolt and tighten the bolt to 70 N.m (52 lb ft).