Other Name: Belt Kit, Passenger Seat (Retractor Side) *Graphite *Graphite; Seat Belt Assembly; Belt & Retractor; Kits for An3, Am6, A52, Rear Jump Seat.
Other Name: Belt Kit, Driver Seat (Buckle Side) *Graphite; Outer Buckle; Latch; Belt Kit, An3 - Front Bucket Seat; Av5 - Front High Back Bucket; Am6 - Front Split Bench
Position: Driver Side
Replaces: 12470428
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1999-2001 GMC Sonoma | SL, SLE, SLS | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
Other Name: Belt Kit, Passenger Seat (Retractor Side) Graphite; Seat Belt Assembly; Belt Kit, Av5 - Front High Back Bucket; Belt Kit, A52 - Front Bench
Position: Passenger Side
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1994 GMC Sonoma | SL, SLE, SLS | 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
Other Name: Belt Kit, Av5- Front High Back Bucket; Seat Belt Assembly; Belt Kit, Rear Jump Seat; Belt Kit, Seat Belt
Position: Front
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1994 GMC Sonoma | SL, SLE, SLS | 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
| Page 1 of 3 |Next >
1-20 of 48 Results
GMC Sonoma Seat Belt
Our website offers an extensive catalog of genuine GMC Sonoma Seat Belt at unbeatable prices. Every OEM GMC Sonoma Seat Belt comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Sonoma Seat Belt Parts Questions & Experts Answers
A: A service on the seat belt commences with bolt removal from the vehicle to lower seat belt anchor plate. A flat-bladed tool should be used for carefully opening the upper seat belt anchor plate cover before removing the bolt that secures the assembly. Start by removing the body side trim panel then pass the seat belt through the opening present in the body side trim cover. Pass the bolt which lets retain the seat belt retractor assembly and pull the assembly out of your vehicle. The seat belt retractor assembly installation requires repositioning it to the vehicle space before securing it with the bolt while tightening it to 70 N.m (52 lb ft). Put the seat belt through the opening in the body side trim cover before reinstalling the body side trim panel and pressing the seat belt opening trim cover tightly against its place. Use the upper seat belt anchor plate to mount the bolt which needs to be tightened to 70 N.m (52 lb ft) before installing the upper seat belt anchor plate cover. Fasten the lower seat belt anchor plate and bolt with a torque value of 70 N.m (52 lb ft).