OEM 2004 Cadillac DeVille Throttle Position Sensor

2004 Cadillac DeVille Parts Questions & Experts Answers

• Q: How to replace the Throttle Position Sensor on 2004 Cadillac DeVille?

  A: The first task to replace the throttle position (TP) sensor involves separating the idle air control (IAC) electrical connector from the iac sensor and the manifold absolute pressure (MAP) sensor electrical connector from the MAP Sensor. The tp sensor retaining screws represent the first step after removing the water pump belt cover while also disconnecting both the tp sensor electrical connector from the tp sensor . To install the part join a fresh o-ring onto the tp sensor followed by plugging in the tp sensor electrical connector into the tp sensor . The tp sensor should be installed onto the Throttle Body followed by tightening the tp sensor screws to 2.3 n.m (20 lb in). Install the MAP Sensor electrical connector to the MAP Sensor while the iac sensor receives its electrical connector from the iac. The last step involves the water pump belt and tensioner cover's reinstallation after performing a tp sensor learn procedure by setting the ignition to run/on for one minute before moving to lock/off for 15 seconds.