OEM 2004 Cadillac Seville Throttle Position Sensor

2004 Cadillac Seville Parts Questions & Experts Answers

• Q: How to replace the Throttle Position Sensor on 2004 Cadillac Seville?

  A: The replacement process for the throttle position (TP) sensor starts by removing both the idle air control (IAC) electrical connector from the iac sensor and the manifold absolute pressure (MAP) sensor electrical connector from the MAP Sensor. Begin by removing the water pump belt cover before unmounting screws and disconnecting the electrical connector of the tp sensor. Finally detach the electrical connector from the tp sensor. The tp sensor installation requires you to attach a new 0-ring to the tp sensor before connecting the tp sensor electrical connector to its place on the tp sensor . Fasten the tp sensor into the Throttle Body position while tightening its screws to reach 2.3 nm (20 lb in). The installation includes putting the iac electrical connector to the iac sensor and the MAP Sensor connector to its respective sensor. Reinstall the water pump belt as well as tensioner cover before conducting the tp sensor learn procedure by setting ignition to run/on for 1 minute followed by turning it off for 15 seconds.