How to replace the brake master cylinder on 2004 Chevrolet Corvette?

To remove the Brake Master Cylinder, disconnect the electrical connection from the Brake Fluid Level Sensor and the brake pipes connected to the master cylinder; ensure putting in proper rubber caps or plugs on the uncovered brake pipe end of the master cylinder to avoid fluid loss and contamination. Then, plug the free ends of the brake pipes and disconnect the master cylinder from the vehicle by removing the mounting nuts, and removing the master cylinder from the vehicle draining all of its brake fluid from the reservoir. Bench bleed new master cylinder and then install it to the Brake Booster while you install the master cylinder mounting nuts to a torque of 29 nm (21 ft. Lbs). Take off the plugs from the brake pipes, attach the brake pipes to the master cylinder, and tighten the fittings to 24 nm (18 ft-lbs). Lastly, reconnect the electrical connector back to the Brake Fluid Level Sensor and bleed the hydraulic brake system.

OEM 2004 Chevrolet Corvette Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Master Cylinders found

View related parts
2004 Chevrolet Corvette Master Cylinder Part Number: 19209263
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Brake Master Cylinder
- Replaces: 18060785
- Item Weight: 2.60 Pounds
- Item Dimensions: 9.5 x 9.3 x 8.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19209263
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
2004 Chevrolet Corvette Overhaul Kit Part Number: 18026279
Product Specifications
- Other Name: Cylinder Kit, Brake Master; Cylinder Kit, Brake Master Cylinder
- Item Weight: 0.60 Pounds
- Item Dimensions: 5.3 x 1.6 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18026279
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS

2004 Chevrolet Corvette Brake Master Cylinder

With a comprehensive array of OEM 2004 Chevrolet Corvette Brake Master Cylinder, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Corvette Brake Master Cylinder are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Corvette Brake Master Cylinder Parts and Q&A

Q: How to replace the brake master cylinder on 2004 Chevrolet Corvette?
A: To remove the Brake Master Cylinder, disconnect the electrical connection from the Brake Fluid Level Sensor and the brake pipes connected to the master cylinder; ensure putting in proper rubber caps or plugs on the uncovered brake pipe end of the master cylinder to avoid fluid loss and contamination. Then, plug the free ends of the brake pipes and disconnect the master cylinder from the vehicle by removing the mounting nuts, and removing the master cylinder from the vehicle draining all of its brake fluid from the reservoir. Bench bleed new master cylinder and then install it to the Brake Booster while you install the master cylinder mounting nuts to a torque of 29 nm (21 ft. Lbs). Take off the plugs from the brake pipes, attach the brake pipes to the master cylinder, and tighten the fittings to 24 nm (18 ft-lbs). Lastly, reconnect the electrical connector back to the Brake Fluid Level Sensor and bleed the hydraulic brake system.