How to replace the Camshaft Position Sensor on 2004 Chevrolet Impala?

Before you can replace the camshaft position (CMP) sensor, you need to take off the coolant recovery reservoir and the Drive Belt. Take off the electrical connector from the Camshaft Position Sensor , then remove the bolt and take the sensor out of the engine front cover. Start by putting the new sensor on the engine front cover, making sure to follow the fastener notice, then tighten the sensor bolt with 10 n.m (89 lb in) of torque. Once the electrical connector is attached to the Camshaft Position Sensor , put the Drive Belt back on and install the coolant recovery reservoir.

OEM 2004 Chevrolet Impala Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Camshaft Position Sensors found

View related parts
2004 Chevrolet Impala Camshaft Position Sensor
Part Number: 12576607
$30.18 MSRP: $56.67
You Save: $26.49 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.8 x 3.0 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12576607
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Impala Submodels:
- Base | 6 Cyl 3.4 L GAS
View related parts
2004 Chevrolet Impala Camshaft Position Sensor
Part Number: 10456148
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Crankshaft Position Sensor; Crankshaft Sensor; Camshaft Sensor
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.3 x 2.3 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10456148
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Impala Submodels:
- Base, LS, LS Sport, Police, SS | 6 Cyl 3.8 L GAS

2004 Chevrolet Impala Camshaft Position Sensor

With a comprehensive array of OEM 2004 Chevrolet Impala Camshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Impala Camshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Impala Parts Questions & Experts Answers

Q: How to replace the Camshaft Position Sensor on 2004 Chevrolet Impala?
A: Before you can replace the camshaft position (CMP) sensor, you need to take off the coolant recovery reservoir and the Drive Belt. Take off the electrical connector from the Camshaft Position Sensor , then remove the bolt and take the sensor out of the engine front cover. Start by putting the new sensor on the engine front cover, making sure to follow the fastener notice, then tighten the sensor bolt with 10 n.m (89 lb in) of torque. Once the electrical connector is attached to the Camshaft Position Sensor , put the Drive Belt back on and install the coolant recovery reservoir.

Related 2004 Chevrolet Impala Parts

Alternate Year Models

2003 Chevrolet Impala Camshaft Position Sensor 2005 Chevrolet Impala Camshaft Position Sensor