How to replace the rear door hinge on 2005 Buick LaCrosse?

You should apply masking tape to the door edge before replacing a rear door hinge to protect the paint. The process of changing rear door hinges starts by opening the front door then stops before opening the rear door while performing the replacement. Prepare the area surrounding the hinge by wiping it clean then use a grease pencil to make a marking on the hinge location. The replacement process for upper hinge breaches requires starting with bolt removal from the door side in order (1, 4) before progressing to the matching sequence from the hinge pillar side. The sequence (3, 2) guides removal of lower hinge bolts from the door side before proceeding to take out the lower hinge bolts from the hinge pillar side. Place the new hinge onto the door while the hinge points are settled into the marks found on either the hinge pillar or door side. You must start with installing the lower hinge pillar bolts using sequence (3, 2), before torquing them to 33 N.m (24 lb ft). Then repeat this sequence for the lower hinge bolts installed at the door side and torquing them to the same value. The process includes installing all upper hinge bolts to the hinge pillar side through sequence (1, 4) and torque them to 33 N.m (24 lb ft). Then fit and tighten the upper hinge bolts to the door side through (1, 4) until they reach the same torque. End the process by removing the door support while checking its functionality before removing the masking tape.

OEM 2005 Buick LaCrosse Door Hinge

Interior Door Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Door Hinges found

View related parts
2005 Buick LaCrosse Lower Hinge, Front Driver Side
Part Number: 22743769
$104.91 MSRP: $156.15
You Save: $51.24 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge, Front Door Lower Hinge; Door Hinge; Hinge, Rear Side Door Lower Hinge
- Position: Front Lower Driver Side
- Replaces: 10445130
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.8 x 4.6 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22743769
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick LaCrosse Submodels:
- CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
2005 Buick LaCrosse Lower Hinge, Front Passenger Side
Part Number: 22743768
$92.44 MSRP: $137.59
You Save: $45.15 (33%)
Product Specifications
- Other Name: Hinge, Front Door Lower Hinge; Door Hinge; Hinge, Rear Side Door Lower Hinge
- Position: Front Lower Passenger Side
- Replaces: 10445129
- Item Weight: 2.20 Pounds
- Item Dimensions: 4.8 x 4.4 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22743768
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick LaCrosse Submodels:
- CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
2005 Buick LaCrosse Upper Hinge, Front Passenger Side
Part Number: 22743771
Product Specifications
- Other Name: Hinge Assembly-Front Side Door Upper; Door Hinge; Hinge, Rear Side Door Upper Hinge; Hinge, Front Door Upper Hinge
- Position: Front Upper Passenger Side
- Replaces: 10323830, 10445131, 20963243, 25937753, 10419282, 10338711, 25774778
- Item Weight: 2.20 Pounds
- Item Dimensions: 4.8 x 4.6 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22743771
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick LaCrosse Submodels:
- CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
2005 Buick LaCrosse Upper Hinge, Front Driver Side
Part Number: 22743770
$95.84 MSRP: $142.65
You Save: $46.81 (33%)
Product Specifications
- Other Name: Hinge Assembly-Front Side Door Upper; Door Hinge; Hinge, Rear Side Door Upper Hinge; Hinge, Front Door Upper Hinge
- Position: Front Upper Driver Side
- Replaces: 10338712, 10445132, 20963242, 10323831, 10419283, 25937752, 25774777
- Item Weight: 2.20 Pounds
- Item Dimensions: 4.8 x 4.6 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22743770
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick LaCrosse Submodels:
- CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS

2005 Buick LaCrosse Door Hinge

With a comprehensive array of OEM 2005 Buick LaCrosse Door Hinge, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick LaCrosse Door Hinge are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Buick LaCrosse Door Hinge Parts Questions & Experts Answers

Q: How to replace the rear door hinge on 2005 Buick LaCrosse?
A: You should apply masking tape to the door edge before replacing a rear door hinge to protect the paint. The process of changing rear door hinges starts by opening the front door then stops before opening the rear door while performing the replacement. Prepare the area surrounding the hinge by wiping it clean then use a grease pencil to make a marking on the hinge location. The replacement process for upper hinge breaches requires starting with bolt removal from the door side in order (1, 4) before progressing to the matching sequence from the hinge pillar side. The sequence (3, 2) guides removal of lower hinge bolts from the door side before proceeding to take out the lower hinge bolts from the hinge pillar side. Place the new hinge onto the door while the hinge points are settled into the marks found on either the hinge pillar or door side. You must start with installing the lower hinge pillar bolts using sequence (3, 2), before torquing them to 33 N.m (24 lb ft). Then repeat this sequence for the lower hinge bolts installed at the door side and torquing them to the same value. The process includes installing all upper hinge bolts to the hinge pillar side through sequence (1, 4) and torque them to 33 N.m (24 lb ft). Then fit and tighten the upper hinge bolts to the door side through (1, 4) until they reach the same torque. End the process by removing the door support while checking its functionality before removing the masking tape.