Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2006 Buick LaCrosse Submodels:
CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
2006 Buick LaCrosse Door Hinge
With a comprehensive array of OEM 2006 Buick LaCrosse Door Hinge, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Buick LaCrosse Door Hinge are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2006 Buick LaCrosse Door Hinge Parts and Q&A
Q: How to replace the front door hinge on 2006 Buick LaCrosse?
A: The replacement procedure for the front door hinge starts by using masking tape across the fender and door edges to protect the paint from damage. Start by opening the door while supporting it then wipe the area surrounding the hinge before making the hinge marks with a grease pencil. The procedure for replacing front door hinges starts by removing upper hinge bolts through specific sequences (1, 4) from the door side before removing bolts from the specified sequences (1, 4, 5) at the hinge pillar side. The replacement process for a broken lower hinge includes removing its bolts from the door side sequentially (3, 2) followed by the hinge pillar side in this sequence (3, 2). The replacement procedure requires you to install new hinges to the door by matching marks from the hinge pillar with marks on the door. Place the lower hinge bolts on the hinge pillar side according to sequence (3, 2) while tightening them to 33 N.m (24 lb ft). The installation of lower hinge bolts on the door side follows the specified sequence (3, 2) before being torques to 33 N.m (24 lb ft). Use the correct specified sequence of 1, 4, 5 to install the upper hinge bolts to the hinge pillar side before tightening them to 33 N.m (24 lb ft). Then move onto the upper hinge bolts to the door side which must be installed with the specified sequence of 1, 4 before tightening them to 33 N.m (24 lb ft). Before finishing check the door's function while the support is removed and the tape needs to be taken off.