How to replace the Ignition Control Module on 2005 Buick Park Avenue?

The 14-way connector needs to be disconnected from the Ignition Control Module (ICM) during replacement while turning the ignition off. Start by marking which positions the Spark Plug Wires occupy before unscrewing them from coil assemblies. Begin by removing the screws which affix the coil assemblies to the icm afterward extract the coils with the icm from its bracket. Reattach the coils to the bracket along with the icm then place the screws to retain these components to the bracket and tighten them to 4.5 n.m (40 lb in force). Next connect the Spark Plug Wires and 14-way connector to the module before using a screw tool to tighten it up to 2.1 n.m (19 lb in).

OEM 2005 Buick Park Avenue Ignition Control Module

Ignition Spark Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Control Module found

View related parts
2005 Buick Park Avenue Ignition Module
Part Number: 19245558
$264.99 MSRP: $544.54
You Save: $279.55 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly, Ignition Coil; Ignition Control Module; Engine Control Module; Coil Module; PCM; Module; ECM; Module, Distributor (Also Knock Sensor)
- Replaced by: 19435469
- Item Weight: 1.10 Pounds
- Item Dimensions: 9.7 x 4.3 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19245558
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS

2005 Buick Park Avenue Ignition Control Module

With a comprehensive array of OEM 2005 Buick Park Avenue Ignition Control Module, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick Park Avenue Ignition Control Module are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Buick Park Avenue Parts Questions & Experts Answers

Q: How to replace the Ignition Control Module on 2005 Buick Park Avenue?
A: The 14-way connector needs to be disconnected from the Ignition Control Module (ICM) during replacement while turning the ignition off. Start by marking which positions the Spark Plug Wires occupy before unscrewing them from coil assemblies. Begin by removing the screws which affix the coil assemblies to the icm afterward extract the coils with the icm from its bracket. Reattach the coils to the bracket along with the icm then place the screws to retain these components to the bracket and tighten them to 4.5 n.m (40 lb in force). Next connect the Spark Plug Wires and 14-way connector to the module before using a screw tool to tighten it up to 2.1 n.m (19 lb in).