How to replace the Crankshaft Position Sensor on 2005 Chevrolet Corvette?

To replace the crankshaft position (CKP) sensor, begin by removing the negative Battery Cable, raising the vehicle and removing the Starter. Next, remove the ckp sensor by removing the ckp sensor retaining bolt, remembering to clean around the ckp so as not to let any foreign material enter the engine and then disconnect the ckp sensor electric wire. With the ckp sensor removed, install the new ckp sensor and tighten it in place with the retaining bolt - just 25 n.m (18 lb ft), please. Hook the ckp sensor's electrical connector back up, reattach the Starter, lower the vehicle, and reconnect the negative Battery Cable. Finally, program the transmitters and ckp system variation learn procedure.

OEM 2005 Chevrolet Corvette Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Crankshaft Position Sensors found

View related parts
2005 Chevrolet Corvette Crankshaft Position Sensor
Part Number: 12703627
$58.96 MSRP: $105.28
You Save: $46.32 (44%)
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 12585546
- Item Weight: 2.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12703627
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2005 Chevrolet Corvette Crankshaft Position Sensor
Part Number: 12560228
$65.79 MSRP: $117.48
You Save: $51.69 (44%)
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Crankshaft Sensor
- Replaces: 12555566
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.4 x 2.9 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12560228
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS

2005 Chevrolet Corvette Crankshaft Position Sensor

With a comprehensive array of OEM 2005 Chevrolet Corvette Crankshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Corvette Crankshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Corvette Parts Questions & Experts Answers

Q: How to replace the Crankshaft Position Sensor on 2005 Chevrolet Corvette?
A: To replace the crankshaft position (CKP) sensor, begin by removing the negative Battery Cable, raising the vehicle and removing the Starter. Next, remove the ckp sensor by removing the ckp sensor retaining bolt, remembering to clean around the ckp so as not to let any foreign material enter the engine and then disconnect the ckp sensor electric wire. With the ckp sensor removed, install the new ckp sensor and tighten it in place with the retaining bolt - just 25 n.m (18 lb ft), please. Hook the ckp sensor's electrical connector back up, reattach the Starter, lower the vehicle, and reconnect the negative Battery Cable. Finally, program the transmitters and ckp system variation learn procedure.

Related 2005 Chevrolet Corvette Parts

Alternate Year Models

2004 Chevrolet Corvette Crankshaft Position Sensor 2006 Chevrolet Corvette Crankshaft Position Sensor