How to replace the emblem/nameplate on the body side on 2005 Chevrolet Express 2500?

You need to warm the nameplate using a J 25070 Heat Gun at a distance of 6 inches to prepare it for replacement. Keep the gun about 152 mm from the surface and rotate it in circles for about 30 seconds before beginning the process. Take off the emblem/nameplate from the panel with a flat-plastic tool before cleaning all adhesive from its front and back with 3M(R) P/N 07501. Clean the panel surface with water and soap before drying it with a clean fabric. Use either 3M General Purpose Adhesive Cleaner 08984 or its equivalent to clean remaining adhesive and follow with a clean cloth dipped in an isopropyl alcohol and water mix 50/50 solution. The new emblem/nameplate starts 1.4 inches from the vertical edge with 2 mm tolerance. Place it 44.3 inches (A) across the horizontal edge and 1.4 inches (B) from the vertical edge while using these dimensions. Warm the body panel using J 25070 when the temperature stays under 19° C (66° F) during installation. Pick among 3M(R) Super Automotive Attachment Tape variants 3M(R) 06380 (white backing), 3M(R) 06377 (black backing), or 3M(R) 06382 (gray backing) apply double-coated acrylic foam tape that requires no contact with hands or dirt. Item placement requires you to remove tape tape backing then set your emblem/nameplate to masking tape or magnetic strip and apply constant pressure for 30 seconds before removing tape or strip for secure bonding.

OEM 2005 Chevrolet Express 2500 Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Emblems found

View related parts
2005 Chevrolet Express 2500 Emblem, Front
Part Number: 22744069
$81.26 MSRP: $120.94
You Save: $39.68 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Replaces: 25727580
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.8 x 3.0 x 13.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22744069
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Express 2500 Submodels:
- Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
2005 Chevrolet Express 2500 Nameplate, Rear
Part Number: 20908152
$67.37 MSRP: $100.27
You Save: $32.90 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, End Gate And Rear Door Decoration
- Position: Rear
- Replaces: 25751080
- Item Weight: 0.90 Pounds
- Item Dimensions: 14.6 x 1.8 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20908152
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Express 2500 Submodels:
- Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
2005 Chevrolet Express 2500 Nameplate, Rear
Part Number: 15126056
$60.07 MSRP: $89.40
You Save: $29.33 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, End Gate And Rear Door Decoration; Emblem, Radiator Grille And Front End Ornamentation
- Position: Rear
- Replaces: 15034749, 15053248, 15675118, 15982992, 15998983
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.9 x 16.9 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15126056
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Express 2500 Submodels:
- Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL
View related parts
2005 Chevrolet Express 2500 Nameplate, Rear
Part Number: 23406612
$6.05 MSRP: $9.00
You Save: $2.95 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, End Gate And Rear Door Decoration; Plate, End Gate And Rear Door Decoration
- Position: Rear
- Replaces: 15162868
- Item Weight: 0.30 Pounds
- Item Dimensions: 5.1 x 1.4 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 23406612
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Express 2500 Submodels:
- Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
2005 Chevrolet Express 2500 Nameplate, Front
Part Number: 15114052
Product Specifications
- Other Name: Plate, Front Side Door; Plate Assembly, Cab And Load Carrier Outer Side Decoration
- Position: Front
- Replaces: 15182304, 15707434
- Item Weight: 0.30 Pounds
- Item Dimensions: 10.5 x 1.8 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15114052
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Express 2500 Submodels:
- Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
2005 Chevrolet Express 2500 Nameplate, Rear
Part Number: 25751074
Product Specifications
- Other Name: Plate, End Gate And Rear Door Decoration
- Position: Rear
- Item Weight: 0.30 Pounds
- Item Dimensions: 4.3 x 1.2 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25751074
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Express 2500 Submodels:
- Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
2005 Chevrolet Express 2500 Nameplate
Part Number: 22574521
Product Specifications
- Other Name: Emblem, Bumper/Fascia; Plate, Cab And Load Carrier Decoration; End Gate And Rear Door Decoration; Emblem, Hood Ornament; Front Fender Name
- Position: Rear
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.9 x 1.3 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22574521
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Express 2500 Submodels:
- Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL

2005 Chevrolet Express 2500 Emblem

With a comprehensive array of OEM 2005 Chevrolet Express 2500 Emblem, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Express 2500 Emblem are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Express 2500 Emblem Parts Questions & Experts Answers

Q: How to replace the emblem/nameplate on the body side on 2005 Chevrolet Express 2500?
A: You need to warm the nameplate using a J 25070 Heat Gun at a distance of 6 inches to prepare it for replacement. Keep the gun about 152 mm from the surface and rotate it in circles for about 30 seconds before beginning the process. Take off the emblem/nameplate from the panel with a flat-plastic tool before cleaning all adhesive from its front and back with 3M(R) P/N 07501. Clean the panel surface with water and soap before drying it with a clean fabric. Use either 3M General Purpose Adhesive Cleaner 08984 or its equivalent to clean remaining adhesive and follow with a clean cloth dipped in an isopropyl alcohol and water mix 50/50 solution. The new emblem/nameplate starts 1.4 inches from the vertical edge with 2 mm tolerance. Place it 44.3 inches (A) across the horizontal edge and 1.4 inches (B) from the vertical edge while using these dimensions. Warm the body panel using J 25070 when the temperature stays under 19° C (66° F) during installation. Pick among 3M(R) Super Automotive Attachment Tape variants 3M(R) 06380 (white backing), 3M(R) 06377 (black backing), or 3M(R) 06382 (gray backing) apply double-coated acrylic foam tape that requires no contact with hands or dirt. Item placement requires you to remove tape tape backing then set your emblem/nameplate to masking tape or magnetic strip and apply constant pressure for 30 seconds before removing tape or strip for secure bonding.