How to Replace a Door Emblem with Express Access on 2006 Chevrolet Express 2500?

You need to start by taping off the emblem area and then setting it up for alignment before any work begins. A heat gun (J 25070) should be positioned 152 mm (6.0 in) away from the surface while applying circular heat to the emblem/nameplate for thirty seconds. A plastic flat-bladed tool will remove the emblem/nameplate without causing paint damage. Apply 3M(TM) Scotch Brite Molding Adhesive Remover Disk (3M(TM) P/N 07501) or an equivalent product to dissolve all adhesive from the door panel surface and the back of the emblem/nameplate, followed by cleaning the door surface with varnish makers and painters (VMP) naptha. Reapply tape when the emblem/nameplate location has no markings. Clean and heat the door surface with a heat gun (J 25070) to reach at least 21°C (70°F) but do not let the heat touch the emblem or nameplate adhesive side. After taking off the rear backing you should place the emblem and let it adhere to the door panel surface before slowing down the backing removal. Push the emblem/nameplate by hand for correct adhesive attachment then verify that the area holds before removing tape from around the door emblem.

OEM 2006 Chevrolet Express 2500 Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Emblems found

View related parts
2006 Chevrolet Express 2500 Emblem, Front Part Number: 22744069
$88.57 MSRP: $131.83
You Save: $43.26 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Replaces: 25727580
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.8 x 3.0 x 13.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22744069
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Express 2500 Submodels:
- Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
2006 Chevrolet Express 2500 Nameplate, Rear Part Number: 20908152
$68.71 MSRP: $102.27
You Save: $33.56 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, End Gate And Rear Door Decoration
- Position: Rear
- Replaces: 25751080
- Item Weight: 0.90 Pounds
- Item Dimensions: 14.6 x 1.8 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20908152
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Express 2500 Submodels:
- Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
2006 Chevrolet Express 2500 Nameplate, Rear Part Number: 15126056
$60.07 MSRP: $89.40
You Save: $29.33 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, End Gate And Rear Door Decoration; Emblem, Radiator Grille And Front End Ornamentation
- Position: Rear
- Replaces: 15034749, 15053248, 15675118, 15982992, 15998983
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.9 x 16.9 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15126056
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Express 2500 Submodels:
- Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL
View related parts
2006 Chevrolet Express 2500 Nameplate, Rear Part Number: 23406612
$6.05 MSRP: $9.00
You Save: $2.95 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, End Gate And Rear Door Decoration; Plate, End Gate And Rear Door Decoration
- Position: Rear
- Replaces: 15162868
- Item Weight: 0.30 Pounds
- Item Dimensions: 5.1 x 1.4 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 23406612
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Express 2500 Submodels:
- Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
2006 Chevrolet Express 2500 Nameplate, Rear Part Number: 84682637
$51.41 MSRP: $76.52
You Save: $25.11 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Rear End Panel And Tailgate; Plate Assembly, Emblem, Front and Rear Side Door, Hood Panel Ornamentation, Front Fender Name
- Position: Rear
- Replaces: 15767139, 22884136
- Item Weight: 0.30 Pounds
- Item Dimensions: 7.0 x 3.6 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 84682637
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Express 2500 Submodels:
- Base, LS, LT | 4 Cyl 2.8 L DIESEL, 8 Cyl 6.6 L DIESEL
View related parts
2006 Chevrolet Express 2500 Nameplate, Front Part Number: 15114052
Product Specifications
- Other Name: Plate, Front Side Door; Plate Assembly, Cab And Load Carrier Outer Side Decoration
- Position: Front
- Replaces: 15182304, 15707434
- Item Weight: 0.30 Pounds
- Item Dimensions: 10.5 x 1.8 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15114052
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Express 2500 Submodels:
- Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
2006 Chevrolet Express 2500 Nameplate, Rear Part Number: 25751074
Product Specifications
- Other Name: Plate, End Gate And Rear Door Decoration
- Position: Rear
- Item Weight: 0.30 Pounds
- Item Dimensions: 4.3 x 1.2 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25751074
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Express 2500 Submodels:
- Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
2006 Chevrolet Express 2500 Nameplate Part Number: 22574521
Product Specifications
- Other Name: Emblem, Bumper/Fascia; Plate, Cab And Load Carrier Decoration; End Gate And Rear Door Decoration; Emblem, Hood Ornament; Front Fender Name
- Position: Rear
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.9 x 1.3 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22574521
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Express 2500 Submodels:
- Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL

2006 Chevrolet Express 2500 Emblem

With a comprehensive array of OEM 2006 Chevrolet Express 2500 Emblem, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Express 2500 Emblem are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Express 2500 Emblem Parts and Q&A

Q: How to Replace a Door Emblem with Express Access on 2006 Chevrolet Express 2500?
A: You need to start by taping off the emblem area and then setting it up for alignment before any work begins. A heat gun (J 25070) should be positioned 152 mm (6.0 in) away from the surface while applying circular heat to the emblem/nameplate for thirty seconds. A plastic flat-bladed tool will remove the emblem/nameplate without causing paint damage. Apply 3M(TM) Scotch Brite Molding Adhesive Remover Disk (3M(TM) P/N 07501) or an equivalent product to dissolve all adhesive from the door panel surface and the back of the emblem/nameplate, followed by cleaning the door surface with varnish makers and painters (VMP) naptha. Reapply tape when the emblem/nameplate location has no markings. Clean and heat the door surface with a heat gun (J 25070) to reach at least 21°C (70°F) but do not let the heat touch the emblem or nameplate adhesive side. After taking off the rear backing you should place the emblem and let it adhere to the door panel surface before slowing down the backing removal. Push the emblem/nameplate by hand for correct adhesive attachment then verify that the area holds before removing tape from around the door emblem.