Make sure this part fits

GM 25751074
Nameplate, Rear

2004-2010 GM

Customer Questions & Expert Answers (24)
GM 25751074 Nameplate, Rear
  • Part Description
    Plate, End Gate And Rear Door Decoration
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2010 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2004-2010 Chevrolet Express 2500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2004-2010 Chevrolet Express 3500Base, LS, LT8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2004-2010 GMC Savana 1500Base, LS, LT, SLE6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2004-2010 GMC Savana 2500Base, LS, LT, SLE6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2004-2010 GMC Savana 3500Base, LS, LT, SLE8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25751074 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25751074 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after removing the radiator grille for the 2006 Chevrolet Express 1500? Posted by Customer
    A:
    Take off the nuts that secure the emblem to the radiator grille.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What is the next step after cleaning the panel for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Eliminate any remaining adhesive using 3M(R) General Purpose Adhesive Cleaner 08984 or an equivalent, followed by wiping the panel with a clean lint-free cloth and a 50/50 mixture of isopropyl alcohol and water.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What should be done before installation for the 2008 Chevrolet Express 3500? Posted by Customer
    A:
    Ensure the rear doors are secured and mark the location using masking tape or a magnetic strip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What is the first step to replace the door emblem and nameplate for the 2007 Chevrolet Express 2500? Posted by Customer
    A:
    Apply tape around the area of the door emblem for protection and alignment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What should be done after ensuring proper adhesion for the 2007 Chevrolet Express 2500? Posted by Customer
    A:
    Remove the masking tape or magnetic strip from the right rear door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What tools are needed to replace the emblem/nameplate on the rear door for the 2006 Chevrolet Express 1500? Posted by Customer
    A:
    A Heat Gun (J 25070).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What type of tape can be applied if necessary for the 2010 Chevrolet Express 3500? Posted by Customer
    A:
    Apply a double-coated acrylic foam tape such as 3M(R) Super Automotive Attachment Tape, choosing from 3M(R) 06380 (white backing), 3M(R) 06377 (black backing), or 3M(R) 06382 (gray backing).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What tool should be used to remove the emblem/nameplate for the 2010 Chevrolet Express 2500? Posted by Customer
    A:
    Carefully remove the emblem/nameplate with a plastic, flat-bladed tool to avoid damaging the paint.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What is the first step to replace the rear door emblem/nameplate on a Chevrolet for the 2010 Chevrolet Express 3500? Posted by Customer
    A:
    Use a J 25070 heat gun to warm the emblem/nameplate by holding it approximately 152 mm (6 inches) from the surface and applying heat in a circular motion for about 30 seconds.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    How should the emblem/nameplate be removed for the 2006 Chevrolet Express 3500? Posted by Customer
    A:
    Carefully remove the emblem/nameplate with a plastic, flat-bladed tool to avoid damaging the paint.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What should be done with the adhesive after removing the emblem/nameplate for the 2005 Chevrolet Express 2500? Posted by Customer
    A:
    Remove all adhesive from the body panel and the back of the emblem/nameplate with 3M(R) P/N 07501 or an equivalent.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What tool should be used to remove the emblem/nameplate for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Carefully remove it with a plastic, flat-bladed tool to prevent paint damage.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What should be used to eliminate any remaining adhesive for the 2009 Chevrolet Express 3500? Posted by Customer
    A:
    Use 3M(R) General Purpose Adhesive Cleaner 08984 or an equivalent, followed by wiping the panel with a clean lint-free cloth and a 50/50 mixture of isopropyl alcohol and water.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    How do you remove the emblem/nameplate for the 2009 GMC Savana 3500? Posted by Customer
    A:
    Carefully peel the emblem/nameplate from the panel with a flat-bladed plastic tool.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What tool should be used to remove the emblem/nameplate for the 2006 GMC Savana 2500? Posted by Customer
    A:
    Carefully remove it using a plastic, flat-bladed tool to prevent paint damage.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What is the final step after securing the emblem for the 2009 GMC Savana 1500? Posted by Customer
    A:
    Reinstall the radiator grille using the specified grille replacement procedure.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What should be done after removing the radiator grille for the 2010 GMC Savana 1500? Posted by Customer
    A:
    Take off the nuts that secure the emblem to the radiator grille, and then detach the emblem from the radiator grille.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What is the first step to replace the front side door emblem/nameplate for the 2010 GMC Savana 3500? Posted by Customer
    A:
    Apply tape around the area for protection and alignment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What is the final step after applying the emblem/nameplate for the 2007 GMC Savana 2500? Posted by Customer
    A:
    Inspect the emblem/nameplate for bonding and remove the tape from the area around the door emblem.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What is the first step to replace the grille emblem for the 2005 GMC Savana 3500? Posted by Customer
    A:
    Remove the radiator grille by following the appropriate replacement procedure for either the Uplevel or Base grille.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What should be done after removing the radiator grille for the 2007 GMC Savana 3500? Posted by Customer
    A:
    Take off the nuts that secure the emblem to the radiator grille.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    How do you eliminate any remaining adhesive for the 2007 GMC Savana 2500? Posted by Customer
    A:
    Use 3M(R) General Purpose Adhesive Cleaner 08984 or an equivalent, followed by wiping the panel with a clean lint-free cloth and a 50/50 mixture of isopropyl alcohol and water.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What is the first step to replace the front side door emblem/nameplate for the 2009 GMC Savana 1500? Posted by Customer
    A:
    Apply tape around the area for protection and alignment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Nameplate, Rear 25751074 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25751074 Nameplate, Rear is available in the market under the name GM Emblem. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25751074 Nameplate, Rear fits certain Chevrolet Express 1500, Express 2500, Express 3500 models, as well as GMC Savana 2500, Savana 3500, Savana 1500 models.
The original GM component designated by manufacturer part number 25751074 maintains top performance when functioning as the Plate, End Gate And Rear Door Decoration unit at its Rear. The component 25751074 is constructed from durable material and its dimensions span 4.3 x 1.2 x 0.2 inches while weighing 0.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 25751074 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.