How to service and repair the Valve Stem Oil Seal on 2005 Chevrolet Monte Carlo?

Before working on the Valve Stem Oil Seal you must position the Piston at top dead center (TDC) to keep the valve from entering the cylinder space. Remove the Spark Plug part and wipe dirt from its holding spot before taking it out. Insert the j 22794 Spark Plug port adapter into the Spark Plug port while compressed air keeps the valves secure. Prepare your project by putting the spring inside the j 38606 valve spring compressor (J 38606). Then take off all valve parts including the oil seal to view the spring for wear. Put the new Valve Stem Oil Seal correctly before fitting the valve spring and valve cap together. Use the j 38606 to compress the valve spring then apply the valve locks with grease where needed before letting go of the spring pressure. Position the valve locks before letting the built-up air pressure out through the Spark Plug port with the j 22794. To finish install both the Rocker Arm and the Spark Plug.

OEM 2005 Chevrolet Monte Carlo Valve Stem Oil Seal

Engine Valve Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Valve Stem Oil Seals found

View related parts
2005 Chevrolet Monte Carlo Valve Seals
Part Number: 24508009
$7.09 MSRP: $11.10
You Save: $4.01 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.7 x 2.1 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24508009
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport | 6 Cyl 3.4 L GAS
View related parts
2005 Chevrolet Monte Carlo Valve Seals, Silver
Part Number: 88891774
$5.70 MSRP: $8.93
You Save: $3.23 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal; Intake Valve Seals
- Replaces: 24502713, 24507690
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.7 x 1.5 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 6
- SKU: 88891774
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Monte Carlo Submodels:
- Indianapolis 500 Pace Car, LS, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car, Z34 | 6 Cyl 3.8 L GAS
View related parts
2005 Chevrolet Monte Carlo Valve Seals, Bronze
Part Number: 88891775
$13.11
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal; Exhaust Valve Seals
- Replaces: 24507691
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.0 x 3.7 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88891775
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Monte Carlo Submodels:
- Indianapolis 500 Pace Car, LS, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car, Z34 | 6 Cyl 3.8 L GAS

2005 Chevrolet Monte Carlo Valve Stem Oil Seal

With a comprehensive array of OEM 2005 Chevrolet Monte Carlo Valve Stem Oil Seal, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Monte Carlo Valve Stem Oil Seal are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Monte Carlo Parts Questions & Experts Answers

Q: How to service and repair the Valve Stem Oil Seal on 2005 Chevrolet Monte Carlo?
A: Before working on the Valve Stem Oil Seal you must position the Piston at top dead center (TDC) to keep the valve from entering the cylinder space. Remove the Spark Plug part and wipe dirt from its holding spot before taking it out. Insert the j 22794 Spark Plug port adapter into the Spark Plug port while compressed air keeps the valves secure. Prepare your project by putting the spring inside the j 38606 valve spring compressor (J 38606). Then take off all valve parts including the oil seal to view the spring for wear. Put the new Valve Stem Oil Seal correctly before fitting the valve spring and valve cap together. Use the j 38606 to compress the valve spring then apply the valve locks with grease where needed before letting go of the spring pressure. Position the valve locks before letting the built-up air pressure out through the Spark Plug port with the j 22794. To finish install both the Rocker Arm and the Spark Plug.