How to service and repair the valve guide seal, replace the valve stem oil seal, and valve spring on Chevrolet Monte Carlo?

You must position the Piston at top dead center (TDC) to avoid letting the valve drop into the cylinder prior to changing the Valve Stem Oil Seal and both valve guide seal and valve spring. Start by removing the Spark Plug then cleaning around the Spark Plug valve area. Push the Spark Plug port adapter (Part J 22794) into the spark port opening until you can use compressed air to keep the valves secure. Put the valve spring compressor j 38606 on the valve spring to loosen valve locks, then remove valve cap, valve spring, and valve guide seal for inspection. Put the new valve guide seal into its seat and layer on the valve spring and valve cap on top. Use the valve spring compressor (J 38606) to compress the valve spring then install the valve locks into position with the help of grease when needed. Separate the valve spring and make sure the locking mechanism sits correctly. Following that disconnect the Spark Plug port adapter (J 22794) and put back the Rocker Arm along with the Spark Plug.

OEM Chevrolet Monte Carlo Valve Stem Oil Seal

Engine Valve Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Valve Stem Oil Seals found

View related parts
Chevrolet Monte Carlo Valve Seals Part Number: 12482063
$37.06 MSRP: $63.11
You Save: $26.05 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Kit, Engine Valve; Valve Stem Seal
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Valve Seals Part Number: 12482062
$40.29 MSRP: $69.18
You Save: $28.89 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Kit, Engine Valve; Valve Stem Seal; Valve Spring; Valve Springs
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Valve Seals Part Number: 10212810
$5.08 MSRP: $7.97
You Save: $2.89 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal; Valve Seal Kit
- Replaces: 00460483, 460483
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984 Chevrolet Monte Carlo | Base | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Valve Seals, Bronze Part Number: 88891775
$13.11
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal; Exhaust Valve Seals
- Replaces: 24507691
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2005 Chevrolet Monte Carlo | Indianapolis 500 Pace Car, LS, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car, Z34 | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Valve Seals Part Number: 22531217
$0.18 MSRP: $0.28
You Save: $0.10 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
- Replaces: 10131082
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1997 Chevrolet Monte Carlo | Z34 | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Monte Carlo Valve Seals Part Number: 88891780
$6.16 MSRP: $9.67
You Save: $3.51 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal; Exhaust Valve Seals; Intake Valve Seals
- Replaces: 10166368
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Monte Carlo | LS | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Monte Carlo Valve Seals, Silver Part Number: 88891774
$5.70 MSRP: $8.93
You Save: $3.23 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal; Intake Valve Seals
- Replaces: 24502713, 24507690
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2005 Chevrolet Monte Carlo | Indianapolis 500 Pace Car, LS, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car, Z34 | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Valve Seals, Bronze Part Number: 24508664
$16.40 MSRP: $25.69
You Save: $9.29 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-1999 Chevrolet Monte Carlo | Indianapolis 500 Pace Car, LS, Z34 | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Valve Seals, Silver Part Number: 24508663
$16.40 MSRP: $25.69
You Save: $9.29 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-1999 Chevrolet Monte Carlo | Indianapolis 500 Pace Car, LS, Z34 | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Valve Seals Part Number: 24508009
$7.09 MSRP: $11.10
You Save: $4.01 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Monte Carlo | LS, LS Competition, LS Sport | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Monte Carlo Valve Seals Part Number: 25535162
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal; Intake Valve Seals
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984 Chevrolet Monte Carlo | Base | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Valve Seals Part Number: 25519324
Product Specifications
- Other Name: Seal, Engine Valve; Valve Stem Seal
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1988 Chevrolet Monte Carlo | Base, LS | 6 Cyl 4.3 L GAS

Chevrolet Monte Carlo Valve Stem Oil Seal

Want to cut long-term maintenance and repair costs? Choose OEM Valve Stem Oil Seal. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Monte Carlo parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Monte Carlo Valve Stem Oil Seal includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Monte Carlo Valve Stem Oil Seal Parts Questions & Experts Answers

Valve Seals, Silver
88891774
Q: How to service and repair the valve guide seal, replace the valve stem oil seal, and valve spring on Chevrolet Monte Carlo?
A:
You must position the Piston at top dead center (TDC) to avoid letting the valve drop into the cylinder prior to changing the Valve Stem Oil Seal and both valve guide seal and valve spring. Start by removing the Spark Plug then cleaning around the Spark Plug valve area. Push the Spark Plug port adapter (Part J 22794) into the spark port opening until you can use compressed air to keep the valves secure. Put the valve spring compressor j 38606 on the valve spring to loosen valve locks, then remove valve cap, valve spring, and valve guide seal for inspection. Put the new valve guide seal into its seat and layer on the valve spring and valve cap on top. Use the valve spring compressor (J 38606) to compress the valve spring then install the valve locks into position with the help of grease when needed. Separate the valve spring and make sure the locking mechanism sits correctly. Following that disconnect the Spark Plug port adapter (J 22794) and put back the Rocker Arm along with the Spark Plug.