How to replace the front cross-member in a 4WD on 2005 GMC Canyon?

To replace the transmission cross member on a 4wd vehicle, one must jack it up and apply support to the transmission with a suitable stand or jack before starting such procedures. Take off the nuts that hold the transmission mount to the transmission support, then raise the transmission. Next, remove the vertical bolts that hold the transmission support from the frame, and the horizontal nuts and bolts securing the transmission support. After removing, take the transmission support from frame. For installation, set the transmission support back on the contour of the frame and loosely mount horizontal nuts and bolts. It is essential to follow the fastener notice in service precautions. Next, roughly mount the vertical bolts holding the transmission support. Tighten horizontal nuts to 50 n.m (37 lb ft) and horizontal bolts 100 n.m (74 lb ft). Reduce the transmission, attach the nuts to transmission mount, eliminate the stand or jack, and lastly lower the automobile.

OEM 2005 GMC Canyon Front Cross-Member

Front Engine Cross Member

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Front Cross-Members found

View related parts
2005 GMC Canyon Trans Crossmember Part Number: 15076524
$233.39
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Crossmember, Transmission Support; Transfer Case Mount; Transmission Mount; Crossmember; Crossmember, Transmission Mounting
- Item Weight: 23.50 Pounds
- Item Dimensions: 49.0 x 6.4 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15076524
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2005 GMC Canyon Crossmember Part Number: 15163518
$173.11 MSRP: $258.82
You Save: $85.71 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Crossmember, Frame Bell Housing (Attaches To Frame Andside Rails); Crossmember, Frame Bell Housing(Attaches To Frame And Side Rails)
- Position: Front
- Item Weight: 4.30 Pounds
- Item Dimensions: 19.1 x 12.4 x 12.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15163518
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2005 GMC Canyon Trans Crossmember Part Number: 15076525
$244.71 MSRP: $385.03
You Save: $140.32 (37%)
Product Specifications
- Other Name: Crossmember, Transmission Support; Transfer Case Mount; Transmission Mount; Crossmember, Transmission Mounting
- Item Weight: 19.70 Pounds
- Item Dimensions: 48.2 x 5.9 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15076525
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

2005 GMC Canyon Front Cross-Member

With a comprehensive array of OEM 2005 GMC Canyon Front Cross-Member, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 GMC Canyon Front Cross-Member are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 GMC Canyon Front Cross-Member Parts and Q&A

Q: How to replace the front cross-member in a 4WD on 2005 GMC Canyon?
A: To replace the transmission cross member on a 4wd vehicle, one must jack it up and apply support to the transmission with a suitable stand or jack before starting such procedures. Take off the nuts that hold the transmission mount to the transmission support, then raise the transmission. Next, remove the vertical bolts that hold the transmission support from the frame, and the horizontal nuts and bolts securing the transmission support. After removing, take the transmission support from frame. For installation, set the transmission support back on the contour of the frame and loosely mount horizontal nuts and bolts. It is essential to follow the fastener notice in service precautions. Next, roughly mount the vertical bolts holding the transmission support. Tighten horizontal nuts to 50 n.m (37 lb ft) and horizontal bolts 100 n.m (74 lb ft). Reduce the transmission, attach the nuts to transmission mount, eliminate the stand or jack, and lastly lower the automobile.