How to replace a shock absorber on 2006 Buick Lucerne?

A Shock Absorber replacement starts by lifting and supporting the vehicle while removing the tire and wheel. The first step will be to support the Control Arm using a jack stand followed by removing the automatic level control air tube attached to the shock. You need to remove the lower Shock Absorber retaining bolts after which you should remove the trunk trim to have access to the upper mounting nuts. First remove the upper Shock Absorber cover and afterwards take away the upper Shock Absorber retaining nuts and upper Shock Absorber reinforcement to extract the shock from the vehicle. Follow all service warnings expressed in the fastener installation guidance. Screwing in a new shock while installing the reinforcement and retaining nuts requires the upper Shock Absorber retaining nuts to be tightened to 20 nm (15 ft. Lbs.). You must first install both the upper Shock Absorber cover along with the trunk trim. Install the lower Shock Absorber retaining bolts at 24 nm (18 ft. Lbs.) and attach the automatic level control air tube before reattaching the wheel and tire along with lowering the vehicle.

OEM 2006 Buick Lucerne Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Shock Absorbers found

View related parts
2006 Buick Lucerne Strut Part Number: 19300024
$673.39 MSRP: $1306.92
You Save: $633.53 (49%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Strut Kit, Front And Rear Suspension; Shock Absorber
- Position: Front
- Replaces: 15211374
- Item Weight: 14.20 Pounds
- Item Dimensions: 28.4 x 10.6 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19300024
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2006 Buick Lucerne Shock Absorber, Passenger Side Part Number: 19302769
$575.19 MSRP: $1116.34
You Save: $541.15 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Kit, Shock Absorber Air Lift
- Position: Passenger Side
- Replaces: 15211376
- Item Weight: 9.50 Pounds
- Item Dimensions: 31.9 x 5.5 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19302769
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2006 Buick Lucerne Shock Absorber, Driver Side Part Number: 19302768
$575.19 MSRP: $1116.34
You Save: $541.15 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Kit, Shock Absorber Air Lift
- Position: Driver Side
- Replaces: 15211375
- Item Weight: 9.50 Pounds
- Item Dimensions: 33.2 x 5.4 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19302768
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2006 Buick Lucerne Shock Absorber, Rear Passenger Side Part Number: 19300026
$313.87 MSRP: $609.18
You Save: $295.31 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Kit, Rear Leveling Shock; Absorber Kit, Shock Absorber Air Lift; Absorber, Shock Absorber Air Lift
- Position: Rear Passenger Side
- Replaces: 15873314, 15786901
- Item Weight: 5.80 Pounds
- Item Dimensions: 32.9 x 5.4 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19300026
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Lucerne Submodels:
- CX, CXL, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2006 Buick Lucerne Shock Absorber, Rear Driver Side Part Number: 19300025
$313.87 MSRP: $609.16
You Save: $295.29 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Kit, Rear Leveling Shock; Absorber Kit, Shock Absorber Air Lift; Absorber, Shock Absorber Air Lift
- Position: Rear Driver Side
- Replaces: 15873313
- Item Weight: 5.50 Pounds
- Item Dimensions: 33.5 x 5.5 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19300025
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Lucerne Submodels:
- CX, CXL, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2006 Buick Lucerne Strut Part Number: 19208029
$120.36 MSRP: $226.17
You Save: $105.81 (47%)
ADD TO CART
Product Specifications
- Other Name: Strut Kit, Front and Rear Suspension; Air Spring to Coil Spring Conversion; Complete Suspension Assembly.
- Position: Front
- Replaces: 15211372, 19208028, 15220434
- Item Weight: 7.50 Pounds
- Item Dimensions: 28.5 x 10.7 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19208029
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2006 Buick Lucerne Shock Absorber, Rear Driver Side Part Number: 19300035
$244.89 MSRP: $459.86
You Save: $214.97 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Kit, Rear Leveling Shock; Absorber Kit, Shock Absorber Air Lift
- Position: Rear Driver Side
- Replaces: 15211377, 20759949
- Item Weight: 6.00 Pounds
- Item Dimensions: 33.2 x 5.3 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19300035
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2006 Buick Lucerne Shock Absorber, Rear Passenger Side Part Number: 19300034
Product Specifications
- Other Name: Absorber Kit, Rear Leveling Shock; Absorber Kit, Shock Absorber Air Lift
- Position: Rear Passenger Side
- Replaces: 20759948, 15211378
- Item Weight: 8.90 Pounds
- Item Dimensions: 32.5 x 5.4 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19300034
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS

2006 Buick Lucerne Shock Absorber

With a comprehensive array of OEM 2006 Buick Lucerne Shock Absorber, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Buick Lucerne Shock Absorber are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Buick Lucerne Shock Absorber Parts and Q&A

Q: How to replace a shock absorber on 2006 Buick Lucerne?
A: A Shock Absorber replacement starts by lifting and supporting the vehicle while removing the tire and wheel. The first step will be to support the Control Arm using a jack stand followed by removing the automatic level control air tube attached to the shock. You need to remove the lower Shock Absorber retaining bolts after which you should remove the trunk trim to have access to the upper mounting nuts. First remove the upper Shock Absorber cover and afterwards take away the upper Shock Absorber retaining nuts and upper Shock Absorber reinforcement to extract the shock from the vehicle. Follow all service warnings expressed in the fastener installation guidance. Screwing in a new shock while installing the reinforcement and retaining nuts requires the upper Shock Absorber retaining nuts to be tightened to 20 nm (15 ft. Lbs.). You must first install both the upper Shock Absorber cover along with the trunk trim. Install the lower Shock Absorber retaining bolts at 24 nm (18 ft. Lbs.) and attach the automatic level control air tube before reattaching the wheel and tire along with lowering the vehicle.