How to replace the HVAC control module on 2006 Cadillac STS?

Commence with removing the ashtray and radio, then unscrew the retaining screws from the HVAC control module and disconnect all electrical connectors, before taking out the module. First, install the HVAC control module, attach its electrical connectors, and then screw in the retaining bolts until you reach 2 N.m (18 lb in) as stated in the Fastener Notice. In the end, put the radio and ashtray back in their original positions and perform the programming and setup as described for the HVAC control module.

OEM 2006 Cadillac STS HVAC Control Module

Heater Control Assembly

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 HVAC Control Module found

View related parts
2006 Cadillac STS Control Module
Part Number: 25740415
Product Specifications
- Other Name: Module, Blower Motor Control; Module, A/C Electric Temperature And Motor Control
- Item Weight: 1.30 Pounds
- Item Dimensions: 7.1 x 6.2 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25740415
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac STS Submodels:
- Base, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS

2006 Cadillac STS HVAC Control Module

With a comprehensive array of OEM 2006 Cadillac STS HVAC Control Module, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Cadillac STS HVAC Control Module are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Cadillac STS Parts Questions & Experts Answers

Q: How to replace the HVAC control module on 2006 Cadillac STS?
A: Commence with removing the ashtray and radio, then unscrew the retaining screws from the HVAC control module and disconnect all electrical connectors, before taking out the module. First, install the HVAC control module, attach its electrical connectors, and then screw in the retaining bolts until you reach 2 N.m (18 lb in) as stated in the Fastener Notice. In the end, put the radio and ashtray back in their original positions and perform the programming and setup as described for the HVAC control module.