How to replace the brake drum on 2006 Chevrolet HHR?

To replace the Brake Drum, firstly make sure there are park brakes released, then raise and support the vehicle. Carefully take off the tire and wheel assembly and then the Brake Drum. If, when reinstalling the Brake Drum, a hub/flange mating surface, or rust or corrosion, or the edge of the drum braking surface, if necessary must be cleaned using the rotor resurfacing kit (J 41013). Clean the wheel hub flange using the wheel hub resurfacing kit (J 42450-A). After drum brakes adjustment, fit the drum brake with the tire and wheel assembly. Lastly, apply brakes three times to seat and center the brake shoes into the drum before setting the vehicle.

OEM 2006 Chevrolet HHR Brake Drum

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Drum found

View related parts
2006 Chevrolet HHR Drum
Part Number: 10388690
$48.90 MSRP: $148.57
You Save: $99.67 (68%)
ADD TO CART
Product Specifications
- Other Name: Drum, Front And Rear Wheel Brake; Brake Drum
- Position: Rear
- Item Weight: 11.40 Pounds
- Item Dimensions: 6.2 x 14.3 x 14.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10388690
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

2006 Chevrolet HHR Brake Drum

With a comprehensive array of OEM 2006 Chevrolet HHR Brake Drum, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet HHR Brake Drum are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet HHR Parts Questions & Experts Answers

Q: How to replace the brake drum on 2006 Chevrolet HHR?
A: To replace the Brake Drum, firstly make sure there are park brakes released, then raise and support the vehicle. Carefully take off the tire and wheel assembly and then the Brake Drum. If, when reinstalling the Brake Drum, a hub/flange mating surface, or rust or corrosion, or the edge of the drum braking surface, if necessary must be cleaned using the rotor resurfacing kit (J 41013). Clean the wheel hub flange using the wheel hub resurfacing kit (J 42450-A). After drum brakes adjustment, fit the drum brake with the tire and wheel assembly. Lastly, apply brakes three times to seat and center the brake shoes into the drum before setting the vehicle.