Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2006 Chevrolet Malibu Rack And Pinion

Steering Rack And Pinion
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Rack And Pinions found

  • 2006 Chevy Malibu Rack And Pinion - 22742144
    2006 Chevy Malibu Rack And Pinion Diagram - 22742144
    View related parts

    2006 Chevrolet Malibu Steering Gear

    Part Number: 22742144
    Product Specifications
    • Other Name: Gear Assembly-Steering; Gear Assembly
    • Replaced by: 19330576
    • Item Weight: 18.40 Pounds
    • Item Dimensions: 51.1 x 8.3 x 6.1 inches
    • Condition: New
    • SKU: 22742144
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2006 Chevrolet Malibu Submodels:
    • LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
  • 2006 Chevy Malibu Rack And Pinion - 15858369
    2006 Chevy Malibu Rack And Pinion Diagram - 15858369
    View related parts

    2006 Chevrolet Malibu Steering Gear, Green Line

    Part Number: 15858369
    Product Specifications
    • Other Name: Gear Assembly-Steering; Gear Assembly
    • Replaces: 15216792
    • Item Weight: 17.50 Pounds
    • Item Dimensions: 50.2 x 6.5 x 10.8 inches
    • Condition: New
    • SKU: 15858369
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2006 Chevrolet Malibu Submodels:
    • Base, Hybrid, LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
  • 2006 Chevy Malibu Rack And Pinion - 19303500
    2006 Chevy Malibu Rack And Pinion Diagram - 19303500
    View related parts

    2006 Chevrolet Malibu Steering Gear

    Part Number: 19303500
    Product Specifications
    • Other Name: Gear, Steering; Gear Assembly
    • Replaces: 15216791, 22687087, 15858368, 25902150, 21998461
    • Item Weight: 18.60 Pounds
    • Item Dimensions: 53.2 x 6.1 x 8.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 19303500
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2006 Chevrolet Malibu Submodels:
    • Base, Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS

2006 Chevrolet Malibu Rack And Pinion

With a comprehensive array of OEM 2006 Chevrolet Malibu Rack And Pinion, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Malibu Rack And Pinion are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Malibu Rack And Pinion Parts Questions & Experts Answers

  • Q: How to Replace the Rack and Pinion in a Power Steering System on 2006 Chevrolet Malibu?
    A: You can start Rack And Pinion replacement by driving the Steering Wheel to an open position and removing the key from the ignition. First raise the vehicle and apply support before removing both front wheels and tires. Take out the intermediate shaft to Rack And Pinion pinch bolt and throw it away while making sure the intermediate shaft stays still after separating from the Rack And Pinion. Use a marker to note the alignment of the Rack And Pinion and intermediate shaft before disconnecting them from each other. Then remove the outer Tie Rod End from the Steering Knuckle. Extract the Rack And Pinion through the vehicle's left side by rotating it 90 degrees to clear the rear transmission mount. Rack And Pinion replacement requires complete removal of outer tie rod ends. Begin Rack And Pinion installation by connecting the outer tie rod ends to the Rack And Pinion before placing the Rack And Pinion into position while needing to rotate it to avoid blocking the rear transmission mount. Secure the Rack And Pinion to frame bolts at 70 nm (52 ft. Lbs.) torque and provide an additional 90-degree turn. Apply the intermediate Steering Shaft Rack And Pinion connection steps from removal then secure the new intermediate Steering Shaft to Rack And Pinion pinch bolt with a torque of 49 nm (36 ft. Lbs.). After reconnecting the outer tie rod ends to the Steering Knuckle users should install the front tires and wheels then lower the vehicle before performing an alignment check.

Related 2006 Chevrolet Malibu Parts

Alternate Year Models

+
2005 Chevrolet Malibu Rack And Pinion 2007 Chevrolet Malibu Rack And Pinion