How to replace the Rack and Pinion steering gear on Chevrolet Malibu?

A vehicle lift with tire and wheel removal must occur before starting the Rack And Pinion replacement work. Begin by disconnecting the links of the stabilizer shaft to the control arms then removing tie rod ends from the Steering Knuckle. You must first separate the intermediate shaft lower pinch bolt holding the Rack And Pinion and therefore remove the stabilizer shaft. This job requires removing both power steering hoses from the Rack And Pinion. Follow procedures established for power steering pressure hose replacement and power steering return hose replacement. To remove the Rack And Pinion you must first detach bolts from the frame and pull out the gear through the left wheel opening. First position the Rack And Pinion on the vehicle before installing the Rack And Pinion mounting bolts to the frame. Tighten these bolts to 110 nm (81 ft. Lbs.). Repeat the procedure for power steering pressure hose replacement and power steering return hose replacement to reconnect power steering hoses to the steering gear assembly. Screw the stabilizer shaft and the lower intermediate shaft pinch bolt onto the Rack And Pinion while torquing them to 20 nm (15 ft. Lbs.). Following the assembly of tie rod ends to steering knuckles you must mount stabilizer shaft links onto control arms and restore the tires and wheels to their proper places. Start by lowering the vehicle then remove air pressure from the power steering system while simultaneously aligning the front wheels.

OEM Chevrolet Malibu Rack And Pinion

Steering Rack And Pinion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Rack And Pinions found

View related parts
Chevrolet Malibu Steering Gear Part Number: 84271183
$3782.55 MSRP: $4886.07
You Save: $1103.52 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear, Steering; Gear Assembly; Motor
- Replaced by: 84216769
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2014 Chevrolet Malibu | Eco | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Chevrolet Malibu Steering Gear Part Number: 84929628
$765.34 MSRP: $1065.91
You Save: $300.57 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly-Electrical Dual Pinion Rack & Pinion S; Gear Assembly; Gear, Steering
- Replaced by: 85621696
- Replaces: 84580633, 84462326
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2024 Chevrolet Malibu | Hybrid, L, LS, LT, Premier, RS | 4 Cyl 1.5 L GAS, 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS
View related parts
Chevrolet Malibu Steering Gear Part Number: 84710253
$2024.03 MSRP: $2826.21
You Save: $802.18 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly-Electrical Dual Pinion Rack & Pinion S; Gear Assembly; Gear, Steering
- Replaces: 84163648, 84187572
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017 Chevrolet Malibu | Hybrid, L, LS, LT, Premier | 4 Cyl 1.5 L GAS, 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS
View related parts
Chevrolet Malibu Steering Gear Part Number: 84710243
$1936.46 MSRP: $2680.13
You Save: $743.67 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly-Electrical Dual Pinion Rack & Pinion S; Gear Assembly; Gear, Steering
- Replaces: 84187573, 23449518
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016 Chevrolet Malibu | Hybrid, L, LS, LT, Premier | 4 Cyl 1.5 L GAS, 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS
View related parts
Chevrolet Malibu Steering Gear Part Number: 84544300
$2153.09 MSRP: $2883.88
You Save: $730.79 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly-Electrical Dual Pinion Rack & Pinion S; Gear Assembly; Gear, Steering
- Replaces: 84352218, 84360488
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018 Chevrolet Malibu | Hybrid, L, LS, LT, Premier | 4 Cyl 1.5 L GAS, 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS
View related parts
Chevrolet Malibu Steering Gear Part Number: 84216770
$2144.18 MSRP: $2755.51
You Save: $611.33 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly, Electric Dual Pinion Rack & Pinion Steering; Gear Assembly; Gear, Steering
- Replaces: 13366874, 13376584, 22943370, 23338635
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2015 Chevrolet Malibu | Eco, LS, LT, LTZ | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L GAS
View related parts
Chevrolet Malibu Steering Gear Part Number: 22967888
$897.75 MSRP: $1200.00
You Save: $302.25 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear, Steering
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013 Chevrolet Malibu | LS, LT, LTZ | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Chevrolet Malibu Steering Gear Part Number: 22943374
$1214.34 MSRP: $1579.93
You Save: $365.59 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear, Steering; Gear Assembly
- Replaces: 13376587
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2014 Chevrolet Malibu | Eco, LS, LT, LTZ | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L GAS
View related parts
Chevrolet Malibu Steering Gear Part Number: 19330437
$500.79 MSRP: $791.75
You Save: $290.96 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Kit, Steering (Remanufacture); Gear Assembly; Gear Kit, Steering
- Replaces: 26064256, 26073200, 26055102
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2003 Chevrolet Malibu | Base, LS | 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Malibu Steering Gear Part Number: 84992394
Product Specifications
- Other Name: Gear Assembly-Electrical Dual Pinion Rack & Pinion S; Gear Assembly; Gear, Steering
- Replaces: 22943371, 23338636, 13337583
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2015 Chevrolet Malibu | Eco, LS, LT, LTZ | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L GAS
View related parts
Chevrolet Malibu Steering Gear Part Number: 22742144
Product Specifications
- Other Name: Gear Assembly-Steering; Gear Assembly
- Replaced by: 19330576
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2012 Chevrolet Malibu | LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Malibu Steering Gear, Green Line Part Number: 15858369
Product Specifications
- Other Name: Gear Assembly-Steering; Gear Assembly
- Replaces: 15216792
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2012 Chevrolet Malibu | Base, Hybrid, LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Malibu Steering Gear Part Number: 25978193
Product Specifications
- Other Name: Gear, Steering
- Replaces: 22814129
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012 Chevrolet Malibu | LS, LT, LTZ | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Malibu Steering Gear Part Number: 19303500
Product Specifications
- Other Name: Gear, Steering; Gear Assembly
- Replaces: 15216791, 22687087, 15858368, 25902150, 21998461
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chevrolet Malibu | Base, Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS

Chevrolet Malibu Rack And Pinion

Want to cut long-term maintenance and repair costs? Choose OEM Rack And Pinion. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Malibu parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Malibu Rack And Pinion includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet Malibu Rack And Pinion is a component that relays the rotation of the steering wheel into lateral motion of the front wheels. This rack and pinion system include a metal pipe that contains the gears whereby the rack gear is linked with tie-rods which controls the wheels. Currently, most of the Chevrolet Malibu cars employ power steering with rack and pinion mechanism; this works by applying hydraulic pressure to the rack through a valve sited on the pinion gear. Problems of the steering rack include leakage due to wear of the rubber seals or hoses, and the wearing of the gears which results to grinding sound and loose steering. There are instances where there is a lot of play in the steering wheel or the car pulls to one side and this could be as a result of a bad rack and pinion assembly that requires to be replaced.

Chevrolet Malibu Rack And Pinion Parts Questions & Experts Answers

Steering Gear
19330437
Q: How to replace the Rack and Pinion steering gear on Chevrolet Malibu?
A:
A vehicle lift with tire and wheel removal must occur before starting the Rack And Pinion replacement work. Begin by disconnecting the links of the stabilizer shaft to the Control Arms then removing Tie Rod Ends from the Steering Knuckle. You must first separate the intermediate shaft lower pinch bolt holding the Rack And Pinion and therefore remove the stabilizer shaft. This job requires removing both Power Steering Hoses from the Rack And Pinion. Follow procedures established for power steering pressure hose replacement and power steering return hose replacement. To remove the Rack And Pinion you must first detach bolts from the frame and pull out the gear through the left wheel opening. First position the Rack And Pinion on the vehicle before installing the Rack And Pinion mounting bolts to the frame. Tighten these bolts to 110 nm (81 ft. Lbs.). Repeat the procedure for power steering pressure hose replacement and power steering return hose replacement to reconnect power steering hoses to the steering gear assembly. Screw the stabilizer shaft and the lower intermediate shaft pinch bolt onto the Rack And Pinion while torquing them to 20 nm (15 ft. Lbs.). Following the assembly of tie rod ends to steering knuckles you must mount stabilizer shaft links onto control arms and restore the tires and wheels to their proper places. Start by lowering the vehicle then remove air pressure from the power steering system while simultaneously aligning the front wheels.