How to replace the rear brake caliper bracket on 2006 GMC Sierra 1500?

Check brake fluid levels before replacing the rear Brake Caliper Bracket. When the fluid sits midway the reservoir marks you can work without draining but if it reaches the top lower it to center position. Position a large c-clamp over the top of the caliper with the piston in toward the back of the outboard pad and use the clamp to fully retract the caliper pistons. Use mechanic's wire to hold up the brake caliper while you unscrew its bolts from the bracket. Keep the hydraulic brake hose attached without breaking it throughout the process. Start by taking away brake pads, anti-rattle clips, and bolts from the Brake Caliper Bracket before disconnecting the bracket. Wipe contaminants off the ends of the bracket and check both the mounting area and threads for dirt. Before putting on the new Brake Caliper Bracket clean the bolt threads with denatured alcohol then apply threadlocker gm p/n 12345493 (Canadian P/N 10953488) to both threads. Attach the Brake Caliper Bracket bolts first then tighten them to 200 nm (148 ft. Lbs.) and fix the anti-rattle clips before placing and fastening the new brake pads on the bracket. Put the brake caliper on the bracket then fasten it with brake bolts at 42 nm (31 ft-lbs) torque and install the wheel and tire unit. When the engine is off depress the brake pedal to two-thirds of its range and ease off before repeating to place the pistons and pads correctly into position. Insert new brake fluid to reach the correct mark in the master cylinder reservoir only when the fluid level drops. Keep the reservoir fresh with clean brake fluid.

OEM 2006 GMC Sierra 1500 Brake Caliper Bracket

Caliper Bracket

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Caliper Brackets found

View related parts
2006 GMC Sierra 1500 Caliper Bracket, Driver Side
Part Number: 25997053
$142.64 MSRP: $255.84
You Save: $113.20 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket Kit-Front Brake Caliper; Brake Caliper Bracket; Caliper Support; Bracket; Bracket Kit, Wheel Brake Cylinder/Caliper
- Position: Driver Side
- Replaces: 18040093
- Item Weight: 7.10 Pounds
- Item Dimensions: 14.3 x 6.2 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25997053
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 GMC Sierra 1500 Submodels:
- Base, C3, Denali, HT, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
2006 GMC Sierra 1500 Caliper Bracket, Passenger Side
Part Number: 25997055
$127.26 MSRP: $246.98
You Save: $119.72 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket Kit-Front Brake Caliper; Brake Caliper Bracket; Caliper Support; Bracket; Bracket Kit, Wheel Brake Cylinder/Caliper
- Position: Passenger Side
- Replaces: 18040094
- Item Weight: 5.10 Pounds
- Item Dimensions: 8.5 x 5.5 x 14.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25997055
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 GMC Sierra 1500 Submodels:
- Base, C3, Denali, HT, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
2006 GMC Sierra 1500 Caliper Bracket, Silver
Part Number: 23498371
$62.47 MSRP: $125.42
You Save: $62.95 (51%)
ADD TO CART
Product Specifications
- Other Name: Bracket Kit-Front Brake Caliper *Silver; Brake Caliper Bracket; Caliper Support; Bracket
- Position: Front
- Item Weight: 6.60 Pounds
- Item Dimensions: 7.1 x 4.7 x 13.4 inches
- Condition: New
- SKU: 23498371
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 GMC Sierra 1500 Submodels:
- AT4, Base, Denali, Elevation, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2006 GMC Sierra 1500 Caliper Mount
Part Number: 18048917
Product Specifications
- Other Name: Bracket, Wheel Brake Cylinder/Caliper; Brake Caliper Bracket
- Position: Rear
- Replaces: 18048082
- Item Weight: 4.30 Pounds
- Item Dimensions: 10.9 x 8.5 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18048917
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 GMC Sierra 1500 Submodels:
- Denali, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
2006 GMC Sierra 1500 Caliper Bracket, Rear
Part Number: 25997047
Product Specifications
- Other Name: Bracket Kit-Rear Brake Caliper; Brake Caliper Bracket; Mount Bracket; Caliper Mount; Caliper Support; Bracket; Bracket Kit, Wheel Brake Cylinder/Caliper
- Position: Rear
- Replaces: 18040099
- Item Weight: 5.10 Pounds
- Item Dimensions: 12.6 x 7.1 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25997047
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 GMC Sierra 1500 Submodels:
- Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
2006 GMC Sierra 1500 Caliper Bracket, Rear
Part Number: 25997048
Product Specifications
- Other Name: Bracket Kit-Rear Brake Caliper; Brake Caliper Bracket; Mount Bracket; Caliper Mount; Caliper Support; Bracket; Bracket Kit, Wheel Brake Cylinder/Caliper
- Position: Rear
- Replaces: 18040098
- Item Weight: 5.20 Pounds
- Item Dimensions: 12.9 x 7.2 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25997048
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 GMC Sierra 1500 Submodels:
- Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS

2006 GMC Sierra 1500 Brake Caliper Bracket

With a comprehensive array of OEM 2006 GMC Sierra 1500 Brake Caliper Bracket, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 GMC Sierra 1500 Brake Caliper Bracket are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 GMC Sierra 1500 Parts Questions & Experts Answers

Q: How to replace the rear brake caliper bracket on 2006 GMC Sierra 1500?
A: Check brake fluid levels before replacing the rear Brake Caliper Bracket. When the fluid sits midway the reservoir marks you can work without draining but if it reaches the top lower it to center position. Position a large c-clamp over the top of the caliper with the piston in toward the back of the outboard pad and use the clamp to fully retract the caliper pistons. Use mechanic's wire to hold up the brake caliper while you unscrew its bolts from the bracket. Keep the hydraulic brake hose attached without breaking it throughout the process. Start by taking away brake pads, anti-rattle clips, and bolts from the Brake Caliper Bracket before disconnecting the bracket. Wipe contaminants off the ends of the bracket and check both the mounting area and threads for dirt. Before putting on the new Brake Caliper Bracket clean the bolt threads with denatured alcohol then apply threadlocker gm p/n 12345493 (Canadian P/N 10953488) to both threads. Attach the Brake Caliper Bracket bolts first then tighten them to 200 nm (148 ft. Lbs.) and fix the anti-rattle clips before placing and fastening the new brake pads on the bracket. Put the brake caliper on the bracket then fasten it with brake bolts at 42 nm (31 ft-lbs) torque and install the wheel and tire unit. When the engine is off depress the brake pedal to two-thirds of its range and ease off before repeating to place the pistons and pads correctly into position. Insert new brake fluid to reach the correct mark in the master cylinder reservoir only when the fluid level drops. Keep the reservoir fresh with clean brake fluid.