How to replace the front brake caliper bracket on the 1500 Series on GMC Sierra 1500?

Check the brake master cylinder fluid before replacing the front Brake Caliper Bracket on 1500 series by draining excess fluid to the midway point between markings. Hook two c-clamps onto the caliper housing to push back its pistons until they extend fully while pressing them against the rear of the outboard pad. Once you rid yourself of the c-clamps you must uninstall the brake caliper bolts while keeping the brake components detached so footage on the brake pedals will not harm anything. Secure the caliper with mechanic's wire and let the hydraulic brake hose stay connected before removing brake pads and clips. After that, take out the Brake Caliper Bracket bolts to take off the whole bracket assembly. Wipe all debris from the surfaces and holes on the bracket before starting installation. Use new Brake Caliper Bracket while removing old adhesive from its mounting surface and treating bolt threads with denatured alcohol before adding threadlocker gm p/n 12345493 (Canadian P/N 10953488) to the threads. Insert and tighten the Brake Caliper Bracket bolts to 180 nm (133 ft lbs). Then position the anti-rattle clips and install the brake pads on the rotor surface. Push the caliper onto its bracket and fasten it by tightening the brake caliper bolts to 100 nm. Reposition the tire and wheel parts then let the vehicle down and press the brake pedal halfway without starting the engine before easing off the pressure. Keep repeating the test until the pedal feels solid and add clean brake fluid to reach the correct reservoir level when necessary.

OEM GMC Sierra 1500 Brake Caliper Bracket

Caliper Bracket

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Brake Caliper Brackets found

View related parts
GMC Sierra 1500 Mount Bracket, Rear Part Number: 18043519
$94.27 MSRP: $129.06
You Save: $34.79 (27%)
ADD TO CART
Product Specifications
- Other Name: Bracket Kit, Rear Brake Caliper; Brake Caliper Bracket; Caliper Mount; Bracket Kit, Wheel Brake Cylinder/Caliper
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2005 GMC Sierra 1500 | Base, C3, Denali, HT, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Sierra 1500 Caliper Support Part Number: 15265833
$68.69 MSRP: $134.48
You Save: $65.79 (49%)
ADD TO CART
Product Specifications
- Other Name: Bracket, Wheel Brake Cylinder/Caliper; Brake Caliper Bracket
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2019 GMC Sierra 1500 | AT4, Base, Denali, Elevation, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Sierra 1500 Caliper Mount, Red Part Number: 13514241
$42.01 MSRP: $81.52
You Save: $39.51 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Wheel Brake Cylinder/Caliper; Brake Caliper Bracket; Caliper Support
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2023 GMC Sierra 1500 | AT4, AT4X, Base, Denali, Denali Ultimate, Elevation, Pro, SLE, SLT | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Sierra 1500 Caliper Bracket, Passenger Side Part Number: 25997055
$127.26 MSRP: $246.98
You Save: $119.72 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket Kit-Front Brake Caliper; Brake Caliper Bracket; Caliper Support; Bracket; Bracket Kit, Wheel Brake Cylinder/Caliper
- Position: Passenger Side
- Replaces: 18040094
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2007 GMC Sierra 1500 | Base, C3, Denali, HT, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Sierra 1500 Caliper Bracket, Driver Side Part Number: 25997053
$142.64 MSRP: $255.84
You Save: $113.20 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket Kit-Front Brake Caliper; Brake Caliper Bracket; Caliper Support; Bracket; Bracket Kit, Wheel Brake Cylinder/Caliper
- Position: Driver Side
- Replaces: 18040093
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2007 GMC Sierra 1500 | Base, C3, Denali, HT, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Sierra 1500 Caliper Bracket, Silver Part Number: 23498371
$62.47 MSRP: $125.42
You Save: $62.95 (51%)
ADD TO CART
Product Specifications
- Other Name: Bracket Kit-Front Brake Caliper *Silver; Brake Caliper Bracket; Caliper Support; Bracket
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2019 GMC Sierra 1500 | AT4, Base, Denali, Elevation, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Sierra 1500 Caliper Bracket, Rear Part Number: 25997047
Product Specifications
- Other Name: Bracket Kit-Rear Brake Caliper; Brake Caliper Bracket; Mount Bracket; Caliper Mount; Caliper Support; Bracket; Bracket Kit, Wheel Brake Cylinder/Caliper
- Position: Rear
- Replaces: 18040099
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2007 GMC Sierra 1500 | Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Sierra 1500 Caliper Mount Part Number: 18048917
Product Specifications
- Other Name: Bracket, Wheel Brake Cylinder/Caliper; Brake Caliper Bracket
- Position: Rear
- Replaces: 18048082
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 GMC Sierra 1500 | Denali, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Sierra 1500 Caliper Bracket, Rear Part Number: 25997048
Product Specifications
- Other Name: Bracket Kit-Rear Brake Caliper; Brake Caliper Bracket; Mount Bracket; Caliper Mount; Caliper Support; Bracket; Bracket Kit, Wheel Brake Cylinder/Caliper
- Position: Rear
- Replaces: 18040098
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2007 GMC Sierra 1500 | Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Sierra 1500 Caliper Bracket Part Number: 18040090
Product Specifications
- Other Name: Bracket, Wheel Brake Cylinder/Caliper; Brake Caliper Bracket; Caliper Mount
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2003 GMC Sierra 1500 | Base, C3, Denali, HT, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

GMC Sierra 1500 Brake Caliper Bracket

Want to cut long-term maintenance and repair costs? Choose OEM Brake Caliper Bracket. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Sierra 1500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Sierra 1500 Brake Caliper Bracket includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

GMC Sierra 1500 Brake Caliper Bracket Parts Questions & Experts Answers

Caliper Bracket, Passenger Side
25997055
Q: How to replace the front brake caliper bracket on the 1500 Series on GMC Sierra 1500?
A:
Check the brake master cylinder fluid before replacing the front Brake Caliper Bracket on 1500 series by draining excess fluid to the midway point between markings. Hook two c-clamps onto the caliper housing to push back its pistons until they extend fully while pressing them against the rear of the outboard pad. Once you rid yourself of the c-clamps you must uninstall the brake caliper bolts while keeping the brake components detached so footage on the brake pedals will not harm anything. Secure the caliper with mechanic's wire and let the hydraulic brake hose stay connected before removing Brake Pads and clips. After that, take out the Brake Caliper Bracket bolts to take off the whole bracket assembly. Wipe all debris from the surfaces and holes on the bracket before starting installation. Use new Brake Caliper Bracket while removing old adhesive from its mounting surface and treating bolt threads with denatured alcohol before adding threadlocker gm p/n 12345493 (Canadian P/N 10953488) to the threads. Insert and tighten the Brake Caliper Bracket bolts to 180 nm (133 ft lbs). Then position the anti-rattle clips and install the brake pads on the rotor surface. Push the caliper onto its bracket and fasten it by tightening the brake caliper bolts to 100 nm. Reposition the tire and wheel parts then let the vehicle down and press the brake pedal halfway without starting the engine before easing off the pressure. Keep repeating the test until the pedal feels solid and add clean brake fluid to reach the correct reservoir level when necessary.