How to replace the MAP Sensor on 2007 Buick Lucerne?

To replace the Manifold Absolute Pressure Sensor, you need to remove the intake manifold cover first. Unplug MAP sensor from its electrical connector at engine harness, and prudently release locking tabs securing MAP sensor and remove it. Before installation, please make sure that the seal of the MAP sensor is installed correctly without any damage. Set and mount the MAP sensor in such a way that the holding tabs click into place to hold it. This is the point to reattach the engine harness electrical connector to the MAP sensor and finally, reinstall the intake manifold cover.

OEM 2007 Buick Lucerne MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2007 Buick Lucerne M.A.P. Sensor
Part Number: 19418808
$73.36 MSRP: $143.62
You Save: $70.26 (49%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; MAP Sensor; Valve Assembly
- Replaces: 16249939, 09359409, 12614973, 16187556, 9359409
- Condition: New
- SKU: 19418808
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2007 Buick Lucerne Submodels:
- CX, CXL, CXS, Super | 6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS

2007 Buick Lucerne MAP Sensor

With a comprehensive array of OEM 2007 Buick Lucerne MAP Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Buick Lucerne MAP Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Buick Lucerne Parts Questions & Experts Answers

Q: How to replace the MAP Sensor on 2007 Buick Lucerne?
A: To replace the Manifold Absolute Pressure Sensor, you need to remove the intake manifold cover first. Unplug MAP sensor from its electrical connector at engine harness, and prudently release locking tabs securing MAP sensor and remove it. Before installation, please make sure that the seal of the MAP sensor is installed correctly without any damage. Set and mount the MAP sensor in such a way that the holding tabs click into place to hold it. This is the point to reattach the engine harness electrical connector to the MAP sensor and finally, reinstall the intake manifold cover.