How to replace the MAP Sensor on 2006 Buick Lucerne?

You must remove the intake manifold cover before proceeding with a MAP sensor replacement. First disconnect the engine harness electrical connector from the MAP sensor then remove the locking tabs from the sensor. Check the MAP sensor's seal to confirm its proper installation and no damage before you put in place the new MAP sensor making sure the locking tabs correctly position. The engine harness electrical connector should be reattached to the MAP sensor following the replacement of the intake manifold cover.

OEM 2006 Buick Lucerne MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2006 Buick Lucerne M.A.P. Sensor
Part Number: 19418808
$73.36 MSRP: $143.62
You Save: $70.26 (49%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; MAP Sensor; Valve Assembly
- Replaces: 16249939, 09359409, 12614973, 16187556, 9359409
- Condition: New
- SKU: 19418808
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2006 Buick Lucerne Submodels:
- CX, CXL, CXS, Super | 6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS

2006 Buick Lucerne MAP Sensor

With a comprehensive array of OEM 2006 Buick Lucerne MAP Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Buick Lucerne MAP Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Buick Lucerne Parts Questions & Experts Answers

Q: How to replace the MAP Sensor on 2006 Buick Lucerne?
A: You must remove the intake manifold cover before proceeding with a MAP sensor replacement. First disconnect the engine harness electrical connector from the MAP sensor then remove the locking tabs from the sensor. Check the MAP sensor's seal to confirm its proper installation and no damage before you put in place the new MAP sensor making sure the locking tabs correctly position. The engine harness electrical connector should be reattached to the MAP sensor following the replacement of the intake manifold cover.