How to replace the Wheel Bearing, hub, and seal on a 4WD on 2007 Buick Rainier?

Begin 4wd Wheel Hub bearing seal replacement by taking off the tire wheel center cap and drive axle nut. Lift the vehicle and take off both tire and wheel units. Next, remove the brake rotor. Protect wheel drive shaft threads with a brass drift against the shaft's outer end and sharply hit to separate wheel drive shaft from Wheel Hub. Do not try to remove wheel drive shaft yet. First disconnect the ABS Sensor from its mounting bolt. Afterwards remove the ABS Sensor as well as the Wheel Hub and bearing mounting bolts from the Steering Knuckle before taking off the Wheel Hub and bearing. Take out the splash shield covering the Steering Knuckle. Set the splash shield onto the Steering Knuckle by fitting its threaded holes and matching them with the knuckle's entries. Fit the Wheel Hub and bearing into the Steering Knuckle through its threaded holes before tightening the mounting bolts to 105 n.m (77 lb ft). Insert the ABS Sensor alongside the sensor mounting bolt and fasten both components with 18 n.m (13 lb ft) torque. Put back the brake rotor and reinstall the tire and wheel before lifting the vehicle down. To finish up install the drive axle nut at 140 n.m (103 lb ft) before putting back the tire and wheel center cap.

OEM 2007 Buick Rainier Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Wheel Bearings found

View related parts
2007 Buick Rainier Axle Bearings, Front
Part Number: 26053326
$11.23 MSRP: $20.06
You Save: $8.83 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Front Axle; Wheel Bearing; Axle Bearing; Output Shaft Bearing; Bearing; Bearings; Bearing, Front Wheel Drive Axle Shaft
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.5 x 2.5 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26053326
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Rainier Submodels:
- CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2007 Buick Rainier Wheel Bearing, Rear
Part Number: 12479031
$49.62 MSRP: $96.32
You Save: $46.70 (49%)
ADD TO CART
Product Specifications
- Other Name: Bearing, Rear Axle Shaft; Wheel Bearing Kit; Axle Bearing; Axle Bearings; Shaft Bearings; Outer Bearing; Bearing; Bearing, Rear Wheel
- Position: Rear
- Replaces: 09442126, 9442126
- Item Weight: 1.10 Pounds
- Item Dimensions: 3.4 x 3.5 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 12479031
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Rainier Submodels:
- CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2007 Buick Rainier Hub & Bearing, Front
Part Number: 19259798
$240.21 MSRP: $466.20
You Save: $225.99 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly, Front Wheel (W/Wheel Speed Sensor); Wheel Hub Repair Kit; Wheel Bearing; Axle Bearing; Wheel Hub; Hub; Hub, Front Wheel
- Position: Front
- Replaces: 12413037, 15130858
- Item Weight: 9.80 Pounds
- Item Dimensions: 7.0 x 6.6 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19259798
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Rainier Submodels:
- CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2007 Buick Rainier Bearing, Front
Part Number: 15884291
Product Specifications
- Other Name: Bearing Assembly-Front Wheel Drive Intermediate Shaft; Axle Bearing; Bearing, Front Axle
- Position: Front
- Replaces: 15030024, 15166774, 15200680
- Item Weight: 5.60 Pounds
- Item Dimensions: 11.2 x 10.8 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15884291
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Rainier Submodels:
- CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS

2007 Buick Rainier Wheel Bearing

With a comprehensive array of OEM 2007 Buick Rainier Wheel Bearing, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Buick Rainier Wheel Bearing are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Buick Rainier Parts Questions & Experts Answers

Q: How to replace the Wheel Bearing, hub, and seal on a 4WD on 2007 Buick Rainier?
A: Begin 4wd Wheel Hub bearing seal replacement by taking off the tire wheel center cap and drive axle nut. Lift the vehicle and take off both tire and wheel units. Next, remove the brake rotor. Protect wheel drive shaft threads with a brass drift against the shaft's outer end and sharply hit to separate wheel drive shaft from Wheel Hub. Do not try to remove wheel drive shaft yet. First disconnect the ABS Sensor from its mounting bolt. Afterwards remove the ABS Sensor as well as the Wheel Hub and bearing mounting bolts from the Steering Knuckle before taking off the Wheel Hub and bearing. Take out the splash shield covering the Steering Knuckle. Set the splash shield onto the Steering Knuckle by fitting its threaded holes and matching them with the knuckle's entries. Fit the Wheel Hub and bearing into the Steering Knuckle through its threaded holes before tightening the mounting bolts to 105 n.m (77 lb ft). Insert the ABS Sensor alongside the sensor mounting bolt and fasten both components with 18 n.m (13 lb ft) torque. Put back the brake rotor and reinstall the tire and wheel before lifting the vehicle down. To finish up install the drive axle nut at 140 n.m (103 lb ft) before putting back the tire and wheel center cap.