OEM 2007 Cadillac DTS Parking Brake Cable

2007 Cadillac DTS Parts Questions & Experts Answers

• Q: How to Replace the Left Rear Parking Brake Cable (J55) on 2007 Cadillac DTS?

  A: Vehicle elevation is the first step before starting left rear Parking Brake Cable (J55) replacement. The intermediate brake cable enables you to release tension by pulling it downward. To detach the intermediate brake cable from the front brake cable remove the rear tab in the connector. Proceed by uninstalling the brake cable retaining bolt before lifting the tab to disconnect the brake cable from the equalizer . The Parking Brake Cable release tool (J 37043) enables users to remove the cable from the mounting bracket and to separate it from its bracket. The actuator requires sufficient brake cable length that you can achieve by pushing the inner cable in the forward direction before finally extracting the brake cable from its position. Detach the brake cable from the mounting bracket with help from the Parking Brake Cable release tool (J 37043). Meaningful installation entails correctly inserting the brake cable into the actuator arm followed by mounting it inside the bracket. Attach and position the brake cable onto the rear Control Arm then bolt it properly while tightening it to 24 n.m (18 lb ft). First place the brake cable into the mounting bracket while seating the brake cable in the equalizer. During the installation process for the intermediate and front brake cables in the connector it is essential to bend the lock tab properly and verify that the locking tabs fit correctly. The park brake system adjusts automatically which means users need not adjust the cables. Finally, lower the vehicle.