How to replace the rear brake disc on 2007 Cadillac STS?

You must release the parking brake then raise the vehicle to perform a replacement of the rear Brake Disc. Before replacement disconnect the wheel along with the tire assembly while holding the brake caliper with tuning wire to protect the hydraulic flexible hose. The brake caliper and caliper mounting bracket must be extracted together because any hose tension needs to be avoided. Start by drawing marks on the Brake Disc relative to the wheel studs before you take out its mounting screws and replace it with careful disc extraction. The disc removal tool (J-46277) should be attached to the slide hammer with adapter (J 2619-01) to extract stuck discs. Check the park brake components for damage before replacing defective parts that require attention. You need to clean all rust and contaminants from the hub/axle flange with the wheel hub resurfacing kit (J 42450-A) together with the disc resurfacing kit (J 41013). Remove all debris from mating surfaces of the disc and adjust the shoe clearance if replacing the disc. Install the disc with precision using its matching marks for correct mounting. Fasten the disc with its mounting screw by applying sufficient torque to 14 n.m (124 lb in). Verify the lateral runout measurement of the installed disc before making adjustments to optimize brake performance. The brake caliper along with its bracket should be reinstalled while the tire-wheel assembly returns to its original position followed by vehicle lowering and optional pad and disc burnishing.

OEM 2007 Cadillac STS Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Discs found

View related parts
2007 Cadillac STS Rotor Part Number: 25846216
$85.52 MSRP: $165.96
You Save: $80.44 (49%)
ADD TO CART
Product Specifications
- Other Name: Rotor, Front And Rear Wheel Brake; Brake Rotor
- Position: Rear
- Replaces: 15235140, 25737788
- Item Weight: 19.80 Pounds
- Item Dimensions: 15.4 x 14.9 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 25846216
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2007 Cadillac STS Rotor, Front Part Number: 25750248
$129.89 MSRP: $235.09
You Save: $105.20 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor, Front Brake; Disc Brake Hardware Kit; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Item Weight: 25.90 Pounds
- Item Dimensions: 16.4 x 16.4 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 25750248
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2007 Cadillac STS Rotor Part Number: 15240719
$91.15 MSRP: $178.45
You Save: $87.30 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor, Front And Rear Wheel Brake; Brake Rotor
- Position: Rear
- Replaces: 25693146
- Item Weight: 15.20 Pounds
- Item Dimensions: 15.4 x 14.8 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15240719
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2007 Cadillac STS Rotor, Rear Part Number: 25750257
$79.28 MSRP: $217.92
You Save: $138.64 (64%)
ADD TO CART
Product Specifications
- Other Name: Rotor-Rear Brake; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Rear
- Item Weight: 23.60 Pounds
- Item Dimensions: 17.0 x 16.0 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25750257
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2007 Cadillac STS Rotor Part Number: 88964102
$124.37 MSRP: $223.07
You Save: $98.70 (45%)
Product Specifications
- Other Name: Rotor, Front Brake; Disc Brake Hardware Kit; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Replaces: 18060686
- Item Weight: 23.90 Pounds
- Item Dimensions: 16.0 x 14.7 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 88964102
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2007 Cadillac STS Rotor, Front Part Number: 19303811
Product Specifications
- Other Name: Rotor, Front Brake; Disc Brake Hardware Kit; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Replaces: 89047762
- Item Weight: 16.00 Pounds
- Item Dimensions: 16.4 x 15.9 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19303811
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS

2007 Cadillac STS Brake Disc

With a comprehensive array of OEM 2007 Cadillac STS Brake Disc, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Cadillac STS Brake Disc are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Cadillac STS Brake Disc Parts and Q&A

Q: How to replace the rear brake disc on 2007 Cadillac STS?
A: You must release the parking brake then raise the vehicle to perform a replacement of the rear Brake Disc. Before replacement disconnect the wheel along with the tire assembly while holding the brake caliper with tuning wire to protect the hydraulic flexible hose. The brake caliper and caliper mounting bracket must be extracted together because any hose tension needs to be avoided. Start by drawing marks on the Brake Disc relative to the wheel studs before you take out its mounting screws and replace it with careful disc extraction. The disc removal tool (J-46277) should be attached to the slide hammer with adapter (J 2619-01) to extract stuck discs. Check the park brake components for damage before replacing defective parts that require attention. You need to clean all rust and contaminants from the hub/axle flange with the wheel hub resurfacing kit (J 42450-A) together with the disc resurfacing kit (J 41013). Remove all debris from mating surfaces of the disc and adjust the shoe clearance if replacing the disc. Install the disc with precision using its matching marks for correct mounting. Fasten the disc with its mounting screw by applying sufficient torque to 14 n.m (124 lb in). Verify the lateral runout measurement of the installed disc before making adjustments to optimize brake performance. The brake caliper along with its bracket should be reinstalled while the tire-wheel assembly returns to its original position followed by vehicle lowering and optional pad and disc burnishing.