How to replace the Hydraulic Hose (M86) on 2007 Chevrolet Cobalt?

As a first step for hydraulic Clutch Hose/pipe (M86) replacement begin by removing the ubec while maintaining awareness about brake fluid reaction to paint and electrical elements. A shop towel placed under the Clutch Master Cylinder and brake master cylinder reservoir will catch any escaping fluid. To begin the replacement of the hydraulic Clutch Hose/pipe (M86) first disconnect the Clutch Hose from the Clutch Master Cylinder and brake master cylinder reservoir then disconnect the clutch line at the clutch actuator cylinder and the transaxle while draining fluid into a suitable container. To install the system first make sure the clutch line locks before connecting the clutch line to both the Clutch Master Cylinder and transaxle then complete the installation by connecting the Clutch Hose to the clutch actuator cylinder and brake master cylinder reservoir. After properly disposing of the shop towel you should install the ubec. Pump dot 3 hydraulic fluid into the brake/clutch reservoir until it reaches the recommended mark before performing a clutch hydraulic system bleeding operation.

OEM 2007 Chevrolet Cobalt Hydraulic Hose

Brake Hydraulic Line

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Hydraulic Hoses found

View related parts
2007 Chevrolet Cobalt Flex Hose Part Number: 12582665
$62.12 MSRP: $105.75
You Save: $43.63 (42%)
ADD TO CART
Product Specifications
- Other Name: Hose, Hydraulic Clutch Reservoir; Hydraulic Hose; Clutch Hose
- Item Weight: 2.30 Pounds
- Item Dimensions: 24.7 x 6.2 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12582665
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Chevrolet Cobalt Flex Hose Part Number: 19366736
$12.99 MSRP: $31.20
You Save: $18.21 (59%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Rear Brake Front; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front and Rear
- Replaces: 22706789
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.4 x 3.4 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19366736
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Chevrolet Cobalt Flex Hose, Rear Driver Side Part Number: 19366742
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Driver Side
- Replaces: 19331548, 22720042
- Item Weight: 0.60 Pounds
- Item Dimensions: 7.2 x 3.2 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366742
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Chevrolet Cobalt Flex Hose Part Number: 12591340
Product Specifications
- Other Name: Hose, Hydraulic Clutch Reservoir; Hydraulic Hose; Clutch Hose
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12591340
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2007 Chevrolet Cobalt Submodels:
- SS | 4 Cyl 2.0 L GAS
View related parts
2007 Chevrolet Cobalt Flex Hose, Rear Passenger Side Part Number: 19366741
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Passenger Side
- Replaces: 22720049, 19331547
- Item Weight: 0.60 Pounds
- Item Dimensions: 6.8 x 3.2 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366741
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

2007 Chevrolet Cobalt Hydraulic Hose

With a comprehensive array of OEM 2007 Chevrolet Cobalt Hydraulic Hose, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Cobalt Hydraulic Hose are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Cobalt Hydraulic Hose Parts and Q&A

Q: How to replace the Hydraulic Hose (M86) on 2007 Chevrolet Cobalt?
A: As a first step for hydraulic Clutch Hose/pipe (M86) replacement begin by removing the ubec while maintaining awareness about brake fluid reaction to paint and electrical elements. A shop towel placed under the Clutch Master Cylinder and brake master cylinder reservoir will catch any escaping fluid. To begin the replacement of the hydraulic Clutch Hose/pipe (M86) first disconnect the Clutch Hose from the Clutch Master Cylinder and brake master cylinder reservoir then disconnect the clutch line at the clutch actuator cylinder and the transaxle while draining fluid into a suitable container. To install the system first make sure the clutch line locks before connecting the clutch line to both the Clutch Master Cylinder and transaxle then complete the installation by connecting the Clutch Hose to the clutch actuator cylinder and brake master cylinder reservoir. After properly disposing of the shop towel you should install the ubec. Pump dot 3 hydraulic fluid into the brake/clutch reservoir until it reaches the recommended mark before performing a clutch hydraulic system bleeding operation.