How to replace the rear brake line on 2007 Chevrolet Cobalt?

To change the rear brake hose, first lift and support the vehicles then remove tire and wheel assembly. Accordingly, clean out all dirt and foreign matter from the brake hose ends as well as from brake pipe fittings. Disengage the brake pipe fittings from the brake hose using a back up wrench, covering the ends with a plug to avoid the loss and contamination of fluid. Take the brake hose retaining clips off from the hose mounting brackets and the hose from the mounting brackets as well. For installation, mount on to position the brake hose in the mounting brackets such that the hose fittings go into the notch in the brackets, and install the hose retaining clips onto the hose fittings. With the aid of back up wrench on the hose fitting, mount up the brake pipe fittings in the rear brake hose and tighten to 19 N.m (14 lb ft). Replace the tire and the wheel set making sure that the hose does not touch every component of the suspension; if it does, then take away the hose and fix the problem. Finally, bleed the hydraulic brakes system and bring the vehicle down.

OEM 2007 Chevrolet Cobalt Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Lines found

View related parts
2007 Chevrolet Cobalt Flex Hose, Front
Part Number: 19366692
$23.23 MSRP: $70.51
You Save: $47.28 (68%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front
- Replaces: 22716552, 15870413
- Item Weight: 1.30 Pounds
- Item Dimensions: 5.2 x 2.0 x 12.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366692
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Chevrolet Cobalt Flex Hose
Part Number: 19366736
$12.99 MSRP: $31.20
You Save: $18.21 (59%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Rear Brake Front; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front and Rear
- Replaces: 22706789
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.4 x 3.4 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19366736
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Chevrolet Cobalt Flex Hose, Rear Driver Side
Part Number: 19366742
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Driver Side
- Replaces: 19331548, 22720042
- Item Weight: 0.60 Pounds
- Item Dimensions: 7.2 x 3.2 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366742
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Chevrolet Cobalt Flex Hose, Rear Passenger Side
Part Number: 19366741
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Passenger Side
- Replaces: 22720049, 19331547
- Item Weight: 0.60 Pounds
- Item Dimensions: 6.8 x 3.2 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366741
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

2007 Chevrolet Cobalt Brake Line

With a comprehensive array of OEM 2007 Chevrolet Cobalt Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Cobalt Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Cobalt Parts Questions & Experts Answers

Q: How to replace the rear brake line on 2007 Chevrolet Cobalt?
A: To change the rear brake hose, first lift and support the vehicles then remove tire and wheel assembly. Accordingly, clean out all dirt and foreign matter from the brake hose ends as well as from brake pipe fittings. Disengage the brake pipe fittings from the brake hose using a back up wrench, covering the ends with a plug to avoid the loss and contamination of fluid. Take the brake hose retaining clips off from the hose mounting brackets and the hose from the mounting brackets as well. For installation, mount on to position the brake hose in the mounting brackets such that the hose fittings go into the notch in the brackets, and install the hose retaining clips onto the hose fittings. With the aid of back up wrench on the hose fitting, mount up the brake pipe fittings in the rear brake hose and tighten to 19 N.m (14 lb ft). Replace the tire and the wheel set making sure that the hose does not touch every component of the suspension; if it does, then take away the hose and fix the problem. Finally, bleed the hydraulic brakes system and bring the vehicle down.