OEM 2007 Chevrolet Corvette Rack and Pinion Boot

2007 Chevrolet Corvette Parts Questions & Experts Answers

• Q: How to replace the Rack and Pinion Boot on 2007 Chevrolet Corvette?

  A: In order to replace the rack and pinion boot, gather the following tools: Keystone Clamp Pliers (J 22610). First, remove the outer tie rod, the nut from the inner tie rod assembly, and then the tie rod clamp. Cut and throw away the boot clamp using the side cutters, and then remove the rack and pinion boot . For the installation to go on well, put the new boot clamp on the rack and pinion boot and apply some grease on the inner rod and the gear assembly before installing the boot on the inner tie rod assembly. Make sure the rack and pinion boot is not twisted or malformed; If needed, mold it with your hands before safely, then tightening it in place. Then, install the boot into the gear assembly until it is seated in the groove and then using the Keystone Clamp Pliers (J 22610), install and crimp the boot clamp. Finally, put the tie rod end clamp on the boot with pliers, followed by the inner tie rod jam nut, and then reinstall the outer tie rod.