How to replace the lower ball joint on 2007 Chevrolet Equinox?

You need to remove the lower Control Arm first before replacing the Ball Joint and secure it in a suitable holding position. Use an 8 mm (5/16 in) drill bit to pierce through the Ball Joint rivets followed by a 12 mm (31/64 in) drill bit to open the hole completely both before cleaning the Control Arm of leftover burs. Keep the Ball Joint position in mind as you remove it from the parts. Make sure you clean the Control Arm from all dirt particles before starting the installation. Secure the new Ball Joint to the Control Arm according to previous steps and use the supplied hardware only when tightening it even though the bolt head goes on top. Screw the lower Control Arm bolts and nuts 68 n.m (50 lb ft). Put the Control Arm back into place afterward.

OEM 2007 Chevrolet Equinox Ball Joint

Control Arm Joint

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ball Joint found

View related parts
2007 Chevrolet Equinox Ball Joint
Part Number: 88965333
$50.97 MSRP: $80.93
You Save: $29.96 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stud Kit, Front Lower Control Arm Ball; Suspension Ball Joint; Lower Ball Joint; Stud Kit, Steering Knuckle Lower Control Arm Pivot; Stud Kit, Front Wheel Lower Control Arm
- Position: Front Lower
- Replaces: 88955451, 22157089
- Item Weight: 1.80 Pounds
- Item Dimensions: 7.1 x 4.3 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88965333
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Equinox Submodels:
- LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS

2007 Chevrolet Equinox Ball Joint

With a comprehensive array of OEM 2007 Chevrolet Equinox Ball Joint, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Equinox Ball Joint are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Equinox Parts Questions & Experts Answers

Q: How to replace the lower ball joint on 2007 Chevrolet Equinox?
A: You need to remove the lower Control Arm first before replacing the Ball Joint and secure it in a suitable holding position. Use an 8 mm (5/16 in) drill bit to pierce through the Ball Joint rivets followed by a 12 mm (31/64 in) drill bit to open the hole completely both before cleaning the Control Arm of leftover burs. Keep the Ball Joint position in mind as you remove it from the parts. Make sure you clean the Control Arm from all dirt particles before starting the installation. Secure the new Ball Joint to the Control Arm according to previous steps and use the supplied hardware only when tightening it even though the bolt head goes on top. Screw the lower Control Arm bolts and nuts 68 n.m (50 lb ft). Put the Control Arm back into place afterward.

Related 2007 Chevrolet Equinox Parts

Alternate Year Models

2006 Chevrolet Equinox Ball Joint 2008 Chevrolet Equinox Ball Joint