How to replace the front brake caliper bracket on 2007 GMC Envoy?

To replace the front Brake Caliper Bracket first raise the vehicle then remove tire and wheel assembly. Check on the brake caliper assembly and support it with heavy mechanic wire or equivalent when hydraulically flexible brake hose is connected while separated from its mount so as not to cause damage on the hose. Disassemble the front brake caliper assembly and move it to the side, then check the brake pads. Take off the front brake pads from the mounting bracket and check the brake hardware. Once taking out the Brake Pad retaining clips from the mounting bracket, remove the brake caliper mounting bracket retaining bolts prior to the mounting bracket itself. Remove the guide pin seals from brake caliper mounting bracket and inspect brake rotor. Mount on the guide pin seals on the mounting bracket, the guide pins and Brake Pad retaining clips are to be cleaned with denatured alcohol if reused, as are allowed to dry in non-lubricated, filtered air. Spray high-temperature silicone brake lubricant on the brake caliper guide pins, but without contact with Brake Pad retaining clips, and mount the brake caliper mounting bracket. Tighten the brake caliper mounting bracket bolts to the value of 150 n.m (110 lb ft) and install front Brake Pad hardware along with front brake pads to the mounting bracket. Install the brake caliper assembly, tire and wheel assembly afterward, lower the vehicle. The brake pedal should be pumped slowly but firmly to press down the brake pads properly.

OEM 2007 GMC Envoy Brake Caliper Bracket

Caliper Bracket

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Caliper Brackets found

View related parts
2007 GMC Envoy Caliper Mount
Part Number: 88965672
$74.69 MSRP: $116.99
You Save: $42.30 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Front Brake Caliper; Brake Caliper Bracket; Caliper Support; Bracket, Wheel Brake Cylinder/Caliper
- Position: Front
- Item Weight: 4.90 Pounds
- Item Dimensions: 10.5 x 6.1 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88965672
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 GMC Envoy Submodels:
- Denali | 8 Cyl 5.3 L GAS
View related parts
2007 GMC Envoy Caliper Mount
Part Number: 88965679
$80.13 MSRP: $114.13
You Save: $34.00 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Front Brake Caliper; Brake Caliper Bracket; Caliper Support; Bracket, Wheel Brake Cylinder/Caliper
- Position: Front
- Item Weight: 4.90 Pounds
- Item Dimensions: 10.5 x 6.0 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88965679
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 GMC Envoy Submodels:
- Denali | 8 Cyl 5.3 L GAS
View related parts
2007 GMC Envoy Caliper Mount
Part Number: 89027181
Product Specifications
- Other Name: Bracket Kit, Rear Brake Caliper; Bracket Kit, Wheel Brake Cylinder/Caliper
- Position: Rear
- Replaces: 88935806
- Item Weight: 3.90 Pounds
- Item Dimensions: 8.5 x 8.7 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89027181
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2007 GMC Envoy Caliper Mount
Part Number: 89027180
Product Specifications
- Other Name: Bracket Kit, Rear Brake Caliper; Bracket Kit, Wheel Brake Cylinder/Caliper
- Position: Rear
- Replaces: 88935805
- Item Weight: 3.50 Pounds
- Item Dimensions: 8.5 x 8.5 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89027180
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2007 GMC Envoy Caliper Mount
Part Number: 88965691
Product Specifications
- Other Name: Bracket, Front Brake Caliper; Bracket, Wheel Brake Cylinder/Caliper
- Position: Front
- Item Weight: 4.70 Pounds
- Item Dimensions: 10.4 x 6.1 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88965691
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 GMC Envoy Submodels:
- SLE, SLT | 6 Cyl 4.2 L GAS
View related parts
2007 GMC Envoy Caliper Mount
Part Number: 88965688
Product Specifications
- Other Name: Bracket, Front Brake Caliper; Bracket, Wheel Brake Cylinder/Caliper
- Position: Front
- Item Weight: 4.50 Pounds
- Item Dimensions: 10.6 x 6.1 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88965688
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 GMC Envoy Submodels:
- SLE, SLT | 6 Cyl 4.2 L GAS

2007 GMC Envoy Brake Caliper Bracket

With a comprehensive array of OEM 2007 GMC Envoy Brake Caliper Bracket, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 GMC Envoy Brake Caliper Bracket are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 GMC Envoy Brake Caliper Bracket Parts Questions & Experts Answers

Q: How to replace the front brake caliper bracket on 2007 GMC Envoy?
A: To replace the front Brake Caliper Bracket first raise the vehicle then remove tire and wheel assembly. Check on the brake caliper assembly and support it with heavy mechanic wire or equivalent when hydraulically flexible brake hose is connected while separated from its mount so as not to cause damage on the hose. Disassemble the front brake caliper assembly and move it to the side, then check the brake pads. Take off the front brake pads from the mounting bracket and check the brake hardware. Once taking out the Brake Pad retaining clips from the mounting bracket, remove the brake caliper mounting bracket retaining bolts prior to the mounting bracket itself. Remove the guide pin seals from brake caliper mounting bracket and inspect brake rotor. Mount on the guide pin seals on the mounting bracket, the guide pins and Brake Pad retaining clips are to be cleaned with denatured alcohol if reused, as are allowed to dry in non-lubricated, filtered air. Spray high-temperature silicone brake lubricant on the brake caliper guide pins, but without contact with Brake Pad retaining clips, and mount the brake caliper mounting bracket. Tighten the brake caliper mounting bracket bolts to the value of 150 n.m (110 lb ft) and install front Brake Pad hardware along with front brake pads to the mounting bracket. Install the brake caliper assembly, tire and wheel assembly afterward, lower the vehicle. The brake pedal should be pumped slowly but firmly to press down the brake pads properly.