How to replace the right engine mount on 2008 Buick LaCrosse?

Start the right Engine Mount replacement by disconnecting the negative cable of the battery. Fix the throttle body air inlet duct first until you remove both Engine Mount struts. First raise the vehicle with proper support then pull out the three-way catalytic converter pipe attached to the right Exhaust Manifold. The workers should begin by taking away both the right front wheel and tire then peel off the right engine splash shield. The first step requires removing Engine Mount lower nuts but you must place a wooden block next to the Oil Pan and jack support to avoid damage. Implement a utility stand and wooden block to lift the engine before you eliminate the mount bolts between the bracket and Oil Pan and also the bracket-to-engine bolt. The first operation requires removal of the Engine Mount after removing the Engine Mount bracket and Engine Mount upper nuts. Attaching the Engine Mount to the Engine Mount bracket should be followed by Engine Mount upper nut application then torque these nuts to 53 n.m (39 lb ft). We will fasten the Engine Mount bracket with the Engine Mount to the Oil Pan while hand-tightening all Engine Mount bracket bolts (1, 2). Use a utility stand to lower the engine after torquing the Engine Mount bracket bolt to 58 n.m (43 lb ft). Fasten the Engine Mount lower nuts with a torque of 47 n.m (35 lb.ft). The right engine splash shield and right front wheel and tire installation must be followed by attaching the three-way catalytic converter pipe to the engine right side Exhaust Manifold. You should end this process by lowering the vehicle while installing Engine Mount struts and throttle body air inlet ducts and finally reconnecting the battery ground (negative) cable.

OEM 2008 Buick LaCrosse Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Engine Mounts found

View related parts
2008 Buick LaCrosse Strut Mount
Part Number: 10345904
$129.22 MSRP: $176.94
You Save: $47.72 (27%)
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Torque Strut; Engine Torque Strut Mount; Engine Mount Bracket; Motor Mount
- Item Weight: 2.40 Pounds
- Item Dimensions: 7.4 x 3.9 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10345904
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- Super | 8 Cyl 5.3 L GAS
View related parts
2008 Buick LaCrosse Strut Mount
Part Number: 10271462
$191.34 MSRP: $325.75
You Save: $134.41 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Torque Strut; Engine Torque Strut Mount; Engine Mount Bracket; Motor Mount; Strut Bracket; Lower Bracket; Strut Front Bracket
- Item Weight: 2.40 Pounds
- Item Dimensions: 7.6 x 6.9 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10271462
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- CX, CXL, CXS | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
View related parts
2008 Buick LaCrosse Front Mount
Part Number: 10348601
$98.40 MSRP: $169.01
You Save: $70.61 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Engine Mount Dampening; Engine Mount Bracket; Motor Mount; Mount, Engine Mounting; Engine Mount
- Position: Front
- Replaces: 22188109
- Item Weight: 3.40 Pounds
- Item Dimensions: 8.1 x 5.6 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10348601
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- Super | 8 Cyl 5.3 L GAS
View related parts
2008 Buick LaCrosse Strut Mount
Part Number: 10420009
$45.32 MSRP: $77.17
You Save: $31.85 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Engine Torque Strut; Motor Mount; Strut; Strut, Engine Mounting
- Item Weight: 1.30 Pounds
- Item Dimensions: 7.6 x 3.2 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10420009
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- Super | 8 Cyl 5.3 L GAS
View related parts
2008 Buick LaCrosse Motor Mount
Part Number: 10448575
$67.67 MSRP: $147.42
You Save: $79.75 (55%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Spring Insulator; Lower Mount; Mount Insulator; Mount; Mount, Engine Mounting; Engine Mount
- Replaces: 17998813, 22113282, 22178657, 22146018, 22175206, 10340740, 10448574, 10448576, 22146466
- Item Weight: 4.20 Pounds
- Item Dimensions: 11.6 x 5.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10448575
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- CX, CXL, CXS | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
View related parts
2008 Buick LaCrosse Rear Mount
Part Number: 10447321
$105.54 MSRP: $182.86
You Save: $77.32 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount Assembly-Engine Rear; Engine Mount Bracket; Motor Mount; Mount, Engine Mount Dampening; Mount, Engine Mounting
- Position: Rear
- Replaces: 10420010
- Item Weight: 2.30 Pounds
- Item Dimensions: 6.1 x 6.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10447321
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- Super | 8 Cyl 5.3 L GAS
View related parts
2008 Buick LaCrosse Front Mount Bracket
Part Number: 10345832
$59.56 MSRP: $93.31
You Save: $33.75 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting
- Position: Front
- Item Weight: 2.40 Pounds
- Item Dimensions: 6.0 x 5.7 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10345832
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- Super | 8 Cyl 5.3 L GAS
View related parts
2008 Buick LaCrosse Mount Bracket, Driver Side
Part Number: 15250907
$11.48 MSRP: $48.93
You Save: $37.45 (77%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount; Upper Bracket
- Position: Driver Side
- Replaces: 10312091
- Item Weight: 3.10 Pounds
- Item Dimensions: 8.6 x 8.5 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15250907
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- CXS | 6 Cyl 3.6 L GAS
View related parts
2008 Buick LaCrosse Strut Bracket
Part Number: 10306033
$53.33 MSRP: $89.95
You Save: $36.62 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Motor Mount
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.4 x 7.2 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10306033
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- Super | 8 Cyl 5.3 L GAS
View related parts
2008 Buick LaCrosse Strut Bracket, Driver Side
Part Number: 24503458
Product Specifications
- Other Name: Bracket, Engine Lift; Engine Mount Bracket; Transmission Mount; Motor Mount; Engine Bracket; Lift Bracket; Upper Bracket; Strut Front Bracket; Bracket; Bracket, Engine Mounting
- Position: Driver Side
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.0 x 6.2 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24503458
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- CX, CXL | 6 Cyl 3.8 L GAS
View related parts
2008 Buick LaCrosse Mount Bracket
Part Number: 10345562
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
- Item Weight: 1.30 Pounds
- Item Dimensions: 8.9 x 2.9 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10345562
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- CX, CXL | 6 Cyl 3.8 L GAS
View related parts
2008 Buick LaCrosse Strut Mount
Part Number: 10230877
$4.05 MSRP: $6.35
You Save: $2.30 (37%)
Product Specifications
- Other Name: Strut, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Engine Torque Strut; Motor Mount; Torque Strut; Strut; Strut, Engine Mount Dampening
- Item Weight: 1.30 Pounds
- Item Dimensions: 8.3 x 3.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10230877
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- CX, CXL, CXS | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
View related parts
2008 Buick LaCrosse Strut Bracket, Passenger Side
Part Number: 24506488
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount; Engine Bracket; Upper Bracket
- Position: Passenger Side
- Item Weight: 2.10 Pounds
- Item Dimensions: 6.2 x 5.7 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24506488
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- CX, CXL | 6 Cyl 3.8 L GAS
View related parts
2008 Buick LaCrosse Mount Bracket, Passenger Side
Part Number: 10303681
Product Specifications
- Other Name: Bracket-Engine Mount Strut Engine Side; Engine Mount Bracket; Motor Mount; Upper Bracket; Bracket, Engine Mounting
- Position: Passenger Side
- Item Weight: 2.10 Pounds
- Item Dimensions: 10.0 x 6.6 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10303681
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- CXS | 6 Cyl 3.6 L GAS
View related parts
2008 Buick LaCrosse Mount Bracket
Part Number: 10334474
Product Specifications
- Other Name: Bracket-Engine Mount; Engine Mount Bracket; Motor Mount; Lower Bracket; Bracket, Engine Mounting
- Item Weight: 1.80 Pounds
- Item Dimensions: 10.8 x 4.9 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10334474
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- CXS | 6 Cyl 3.6 L GAS
View related parts
2008 Buick LaCrosse Strut Bracket, Passenger Side
Part Number: 24506489
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount; Engine Bracket; Lower Brace
- Position: Passenger Side
- Item Weight: 1.50 Pounds
- Item Dimensions: 5.9 x 4.2 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24506489
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- CX, CXL | 6 Cyl 3.8 L GAS

2008 Buick LaCrosse Engine Mount

With a comprehensive array of OEM 2008 Buick LaCrosse Engine Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Buick LaCrosse Engine Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Buick LaCrosse Parts Questions & Experts Answers

Q: How to replace the right engine mount on 2008 Buick LaCrosse?
A: Start the right Engine Mount replacement by disconnecting the negative cable of the battery. Fix the throttle body air inlet duct first until you remove both Engine Mount struts. First raise the vehicle with proper support then pull out the three-way catalytic converter pipe attached to the right Exhaust Manifold. The workers should begin by taking away both the right front wheel and tire then peel off the right engine splash shield. The first step requires removing Engine Mount lower nuts but you must place a wooden block next to the Oil Pan and jack support to avoid damage. Implement a utility stand and wooden block to lift the engine before you eliminate the mount bolts between the bracket and Oil Pan and also the bracket-to-engine bolt. The first operation requires removal of the Engine Mount after removing the Engine Mount bracket and Engine Mount upper nuts. Attaching the Engine Mount to the Engine Mount bracket should be followed by Engine Mount upper nut application then torque these nuts to 53 n.m (39 lb ft). We will fasten the Engine Mount bracket with the Engine Mount to the Oil Pan while hand-tightening all Engine Mount bracket bolts (1, 2). Use a utility stand to lower the engine after torquing the Engine Mount bracket bolt to 58 n.m (43 lb ft). Fasten the Engine Mount lower nuts with a torque of 47 n.m (35 lb.ft). The right engine splash shield and right front wheel and tire installation must be followed by attaching the three-way catalytic converter pipe to the engine right side Exhaust Manifold. You should end this process by lowering the vehicle while installing Engine Mount struts and throttle body air inlet ducts and finally reconnecting the battery ground (negative) cable.

Related 2008 Buick LaCrosse Parts

Alternate Year Models

2007 Buick LaCrosse Engine Mount 2009 Buick LaCrosse Engine Mount