Make sure this part fits

GM 10345904
Strut Mount

2006-2011 GM

Customer Questions & Expert Answers (15)
GM 10345904 Strut Mount
GM 10345904 Strut Mount
  • Part Description
    Bracket, Engine Mounting; Engine Mount Torque Strut; Engine Torque Strut Mount; Engine Mount Bracket; Motor Mount
  • Manufacturer
    General Motors
Make sure this part fits
$129.22 MSRP: $176.94
You Save: $47.72 (27%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2008-2009 Buick LaCrosseSuper8 Cyl 5.3 L GAS
    2006-2011 Chevrolet Impala50th Anniversary Edition, LS, LT, LTZ, Police, SS6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
    2006-2007 Chevrolet Monte CarloLS, LT, LTZ, SS6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10345904 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10345904 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How should the engine mount upper nuts be secured for the 2008 Buick LaCrosse? Posted by Customer
    A:
    Secure the engine mount upper nuts by tightening them to 53 N.m (39 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the torque specification for the engine mount bracket bolt for the 2008 Buick LaCrosse? Posted by Customer
    A:
    58 N.m (43 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the next step after removing the engine splash shield for the 2010 Chevrolet Impala? Posted by Customer
    A:
    Remove the engine mount to frame nuts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after removing the splash shield for the 2007 Chevrolet Impala? Posted by Customer
    A:
    Take off the engine mount to frame nuts and place an adjustable jack and a block of wood under the oil pan.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after installing the engine mount for the 2006 Chevrolet Impala? Posted by Customer
    A:
    Install the lower engine mount nuts, tightening them to 50 Nm (37 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What do you do after removing the engine mount/bracket for the 2008 Chevrolet Impala? Posted by Customer
    A:
    Position the new engine mount/bracket to the engine and install the engine mount bracket bolts, tightening them in the specified sequence to 50 N.m (37 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the first step in the installation process for the 2008 Chevrolet Impala? Posted by Customer
    A:
    Begin by attaching the engine mount bracket to the mount, ensuring to follow the Fastener Notice.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    How do you begin the installation process for the 2006 Chevrolet Impala? Posted by Customer
    A:
    Begin by installing the engine mount and then install the lower engine mount nuts, tightening them to 50 Nm (37 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be done after removing the engine mount for the 2007 Chevrolet Impala? Posted by Customer
    A:
    Remove the engine mount bracket to mount nuts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the first step to replace the engine mount bracket for the 2010 Chevrolet Impala? Posted by Customer
    A:
    First, remove the engine mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the final step in the process for the 2006 Chevrolet Monte Carlo? Posted by Customer
    A:
    Install the upper engine mount nuts and tighten them to 50 Nm (37 ft. lbs.), followed by the installation of the left exhaust manifold and the engine mount strut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the next step after raising the engine for the 2006 Chevrolet Monte Carlo? Posted by Customer
    A:
    Remove the engine mount bracket bolts and then take out the engine mount bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be done after removing the engine mount for the 2009 Chevrolet Impala? Posted by Customer
    A:
    Next, take off the engine mount bracket to mount nuts and then remove the engine mount bracket itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the next step after removing the engine splash shield for the 2009 Chevrolet Impala? Posted by Customer
    A:
    Remove the engine mount to frame nuts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Strut Mount 10345904 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10345904 Strut Mount is available in the market under the name GM Engine Mount, Engine Mount Bracket. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10345904 Strut Mount fits certain Chevrolet Impala, Monte Carlo models, as well as Buick LaCrosse models.
The original GM component designated by manufacturer part number 10345904 maintains top performance when functioning as the Bracket, Engine Mounting; Engine Mount Torque Strut; Engine Torque Strut Mount; Engine Mount Bracket; Motor Mount unit. The component 10345904 is constructed from durable material and its dimensions span 7.4 x 3.9 x 3.4 inches while weighing 2.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 10345904 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.